Automatic Trans Compatability???
#1
Registered User
Thread Starter
Join Date: May 2005
Location: CENTRAL FLORIDA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Automatic Trans Compatability???
I have a 1995 2nd gen with a built tranny. It has a triple disk and and billet input shaft and a aluminum pan plus more. The question is how many of these parts are compatable with a 2003 dodge. I am not able to tell by looking at e-stores as the list the same part numbers for all these years. I am not sure if this means they will work or not.
Any thoughts?
Thanks,
Paul
Any thoughts?
Thanks,
Paul
#4
Registered User
Thread Starter
Join Date: May 2005
Location: CENTRAL FLORIDA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replys. This is what I have also heard and believed. I didn't think the tranny itself would work but would like to use the convertor and shaft.
Thanks again.
Paul
Thanks again.
Paul
#5
Thats the one place the parts are different if you have a 48RE in the 03. If its a 47 you should beok.
Thread
Thread Starter
Forum
Replies
Last Post
Jmac
3rd Gen High Performance and Accessories (5.9L Only)
21
11-10-2004 12:41 PM
CruisingRam
2nd Gen. Dodge Ram - No Drivetrain
10
05-24-2004 02:11 PM