ATS Exhaust Manifold/External wastegate Question
#1
ATS Exhaust Manifold/External wastegate Question
i am going witha new turbo with an external wastegate, does anyone know a good shop that can fabricate and external wastegate pipe/mounting provision on my ATS manifold? i have seen several manifols done this way just never go info on who did the work. there are no fabricators in my town with the skill that can do this job. any info would be great.thanks
#2
Registered User
Join Date: Feb 2008
Location: Baldwin, Kansas
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Easiest way to do it is with a spacer. The spacer has an oval shaped hole in it that the blow off valve or wastegate is welded to. It just goes between the turbo and manifold and is about an 1 1/2" thick. Then you have to make some exhaust piping for it to dump into the down pipe.
This isn't exactly back yard mechanic stuff unless you have fabrication skills and a good welder.
This isn't exactly back yard mechanic stuff unless you have fabrication skills and a good welder.
Thread
Thread Starter
Forum
Replies
Last Post
RowJ
Performance and Accessories 2nd gen only
6
03-01-2005 04:50 PM
AK RAM
3rd Gen High Performance and Accessories (5.9L Only)
24
01-20-2005 08:50 PM
KatDiesel
Performance and Accessories 2nd gen only
5
03-11-2004 07:31 AM