Arklahoma Bombers Dyno day.

Dyno day January 10th at Brains Truck Shop (BTS) in Lead Hill AR. Starts at 11AM

$35.00 for three pulls $15.00 each after that.

There will be plaques for

MOST HORSE POWER
MOST TORQUE
BEST IN SHOW
LOUDEST
LOWEST HP/TQ

All types of vehicles and engines are welcome however the plaques are only for the Diesel’s

After the dyno there will be a post dyno day get to gather at Western Sizzlin in Harrison

We would like to have an accurate number by the 31st of December if you want to spin the dyno. Please contact me or biged681985 if you want to attend.

Donations welcome to pay for the plaques

All are welcome to attend.

finally somthing good

Whats that supposed to mean Aaron? lol

.....Ducky lol

Whats that supposed to mean Aaron? lol

.....Ducky lol

im just bored. ya truck pulls and drag races are great but somthing diff is good too. i will prob be there. uhhh if i have a clutch and money i will dyno.
also yes you are the ducky. lol

You dont need a clutch to Dyno....

You dont need a clutch to Dyno....

umm, if you put it on a load dyno, which is the better dyno. You do need a good clutch or it will slip it and burn it! Done it on my mustang on my buddies dynojet

umm, if you put it on a load dyno, which is the better dyno. You do need a good clutch or it will slip it and burn it! Done it on my mustang on my buddies dynojet

I was just messing with him.

Time for a dual disk Aaron?

yes he's goin to have to get a DD. it'll hold sometimes. if he keeps it cool it'll hold. and yes it's a load dyno. i bet i can take the nasty and win the lowest hp and tq. maybe corey will be able to come down and take the big number home. i doubt he will cause it's at the ford boys home and he'd hate to be shown up by a 7.3.

The nasty lol

Maybe I'll have a truck by then and lowest hp truck, well for a dodge anyway.

I just hope to have my truck back together by then.

Maybe I'll have a truck by then and lowest hp truck, well for a dodge anyway.

i think pack will win lowest hp and tq. cuz if u win you will have one big fat turd.

The Nasty can beat a stock ford.

Just heard of this event, count me in. Hoffdog you better roll with me.

yes he's goin to have to get a DD. it'll hold sometimes. if he keeps it cool it'll hold. and yes it's a load dyno. i bet i can take the nasty and win the lowest hp and tq. maybe corey will be able to come down and take the big number home. i doubt he will cause it's at the ford boys home and he'd hate to be shown up by a 7.3.

Whats in take ball park to be high hp that day? I know of a dirty max that if the driver don't sis out can make some decent power.

Not sure yet but it should be up there.

There is also going to be some other stuff given away including a cash prize to the top dogs not sure just how much or what yet but ill let you guys know when i find out.

my guesstimate will be mid 700 the nasty, 170 at the pavement. i'll make bets with anyone that wants to i'll win the low hp and tq. i have the power of a stock 94 auto with a weak tranny.

there is going to be an 89 7.3.....

i have a moped.

How may CCs? remember its an old 7.3 lol

49cc with a turbo, nos, big bore kit, ported and polished.lol I WISH.

What turbo? lol

We will not need any donations for the plaques guys. They have been taken care of by Heartlanddiesels.com. There will also be a cash prize for the top two trucks with and without nos. As well as many other prizes.

Just heard of this event, count me in. Hoffdog you better roll with me.

ill see what i can do

As long as snow ain't hub deep to a farris wheel and the ice ain't pecker deep to a poodle I am there.

What kind of Dyno is it, i need to back some #s up, once i get this turd back together. I should make the 10th i hope

There doing a prize for the loudest????? Hummm... i might be able to compete, at this event lol, the new 7'' is just stupid loud at 4k

Corey you got a stack on now?

it's the same dyno john has corey. and yes he has a single 7" black stack. is any thing going to be different about your pick-em-up????? you're gonna love the Nasty by the way. it's a first class POS. i love it though.

Im guessing its named that way because some girl saw it and said it was nasty!

no i am the one that named that truck the nasty. cause it's nasty. underneath inside under the hood the body. it's all nasty. hence the name, Nasty.

it's the same dyno john has corey. and yes he has a single 7" black stack. is any thing going to be different about your pick-em-up????? you're gonna love the Nasty by the way. it's a first class POS. i love it though.Im trying a diff fuel setup right now, the one you and i talked about not long ago, Pack everything is still in the works, nothing really new, just waiting on the shop to let me know when its time. Talked to them yesterday, and it really looking good.
Nasty, i like it.... LOL what color is it, you know i'll add the that name a little[laugh]

A DYNOJET and a DYNO DYNAMICS are the same dyno?????? I mean I like them both but I didn't know they were the same dyno..

i thougth johns was a dynojet also... not that it matters, both are a load dyno and give close to the same numbers. where's the smiley face that gives the middle finger??? i have a feeling the ford is going to make some big numbers though. you ever plan to outrun him chris??? i'm still anticipating it. the Nasty is green and silver. ugly as can be. but it's fun, i guess.

i thougth johns was a dynojet also... not that it matters, both are a load dyno and give close to the same numbers. where's the smiley face that gives the middle finger??? i have a feeling the ford is going to make some big numbers though. you ever plan to outrun him chris??? i'm still anticipating it. the Nasty is green and silver. ugly as can be. but it's fun, i guess.

yes its his green nasty turd lol

But it tells you how cold it is......

But it tells you how cold it is......

lmao[laugh]yes yes.[laugh]

I need to get my TST back on I haven't ran it at all this year and I've got launch back now, maybe that 60 foot will get back down there. But it's going to have to wait til next year now, you never know I might just take the truck back to stock.....Or I might just have to start sled pulling since their someone won't come racing anymore.

John's is a dyno dynamics. What dynojet does BTS have? The 248H Dynojets are inertia dyno's and not load cell dyno's. I think the Dynojet 250 is a load cell.

Mike it's a 224 model with the brake load setup I think they call it an Eddy brake don't quote me on that though.

if he can get it to stay together it'll be faster than it was. he split an engine and took it out of the truck in 3 pieces. it was neat lookin. and i don't see you truck pullin either, or goin back to stock.

Looks like there will be a few guys from around my neck of the woods going, I think Jason is wanting some new #s

Sweet, hope the weather is fair so a bunch of people can attend. Is the shop big down there or will it be a bunch of standing around outside? Just need to know what to prepare for.

Sweet, hope the weather is fair so a bunch of people can attend. Is the shop big down there or will it be a bunch of standing around outside? Just need to know what to prepare for.

nice big shop

Thats good my trucks kinda BIG LOL

My truck was always bigger thay yours... And my next one will be too... I May even have it down there just to show you what a real truck can do...jk a work truck anyway. Is there a weight limit for the dyno?

I have no idea.

Is it wide enough for duals or do we have to pull a wheel?

IT is not. However Cale said they had all the tools in the shop to pull them off fast.

Good then we won't have to do it.

Well i hope i get the new flux sticks and pump back in time, im hoping in three weeks it will be back up and running

Is there a little cafe in Lead Hill to get breakfast? Our convoy would like to get to town early and eat breakfast. Any info would be appreciated.

Maybe my convoy and your convoy can meet up jammer

Sounds good Corey, when we get something figured out I will let you know.

yes lead hill has a very nice diner

Guys the flyer is done expect it to be on here later tonight.

Puff and Pack. You guys must be smoking if your puff'n a pack a day.
Saw your trucks today.

yes lead hill has a very nice diner

Whats the name and where. On a side note is there a Sleepy diner in Diamond City?

a good greasy diner would be nice

yes there is. it's called sleepy cove i think. and corey, they are having a loudest truck competition i think. at least that's how i understood the flyer. give me a call sometime.

Yeah we are.

When they say loud you me exaust or will Lurch win with his train horn?

Loudest exhaust on the dyno!

It has been moved to 10 AM

Loudest exhaust on the dyno!

It has been moved to 10 AM

Thought it was 10 a.m. all along? [dummy]

lol well you guys kinda knew before most others and i posted it everywhere today.

again the loudest on the dyon won't be able to happen. ventilation hose takes smoke and sound outside.

Oh come on when your truck blows up on the dyno I'm sure it would win. jk

Pack you have a point Ill get back to ya guys....

Ok guys its loudest off the dyno

How will this contest be determined? Applause or what?

Not sure yet. Might have to be a group of gals not affiliated with any "loud" trucks.

how about a wet t-shirt contest inside while we're at it??????? t-h-o hehehehehehehe

I like where this is going. :o

Now as to the entertainment Ground Shakers not here with his stripper pole but I'm sure someone could find one.
Is this going in the right direction guys.....

Whatever, the only stripper on a pole we will see is Packs sister rubbin on someons stack,

ouchie that is sooooooo funny. LMMFAO!!!!!!!! if only you had any idea.

I thought you would like that haha,

This sounds like an awesome event!

i'm deciding which girl i will have out there with me. i seem to be able to not keep the same one around me for very long. so is the black truck mobile again??

Good thing you've got more than one sister since you can't keep one around very long.

i'm deciding which girl i will have out there with me. i seem to be able to not keep the same one around me for very long. so is the black truck mobile again??Not yet, But it should be by thin, i didnt get the chance to send my pump back to John yet, he has been in bad shape so i think it may wait till after, I just hope the stg3 will keep up...

this is gonna be a heckuva event

I just hope the stg3 will keep up...


corey you must really be putting the fuel to her

well dont know yet but i hope so...lol

if your new ones are anything like mine, it won't keep up. i'm thinkin about sayin crap on it and goin dual cp3. that way i know i'll have plenty of fuel.

Yep I think dual CP3's are the best on these common rail trucks.

Dual 13mm P pumps would be better....;)

I dont think the pump was your problem Pack, i think it was those junk ace injectors. Should of kept those DDps and sent them to Don, i know $$$$ but they sure hual the mail :-)

You going to have your truck there Pack?

we have discussed the injetors on the phone and i think you will agree i am right. as for my truck, it will be the nasty. the manvan wil be back in action by april i think. well hope anyways. i will be in attendance though since it's in my back yard basically. and corey i guess we will dyno against each other one day, and see if your flux outdo my ii's.

hey yall im eddie. hope to get to know yall that i dont. ill be there unless i have a major problem come up between now and time.

yellville, is that close to hollerville? [laugh]

about an earshot away. yellville's in a holler. funny thing about that is it really is.

well guys we got a little bit of trouble with the dyno day.

ED got a call from Cale at bts and he said that he didn't think it was going to be as big of a deal as its turning into

he said that he can only dyno 3 trucks an hour so we can only have around thirty trucks dyno. so we have a 30 truck limit. so the first 100% sure trucks that respond before December 31st will be the ones dynoing.

he also said to make it faster and easier to dyno we need to have only singal exhaust. so the one running duals or dual stacks need to figure out a way to block of one side that way we can keep as much black smoke out of the shop as possible.

The price has went up $10. he said if it was just 10-12 trucks it wouldnt be that big of a deal but 30 plus the cost will be more on his end so he is charging an $45 instead of the $35 that he said before.

lastly he said if the weather is real cold and nasty we will have to reschedule to a later date when the weather is better.

we hope to still have all that wants to come and watch. yall have a good day.

You sure you want to do that Pack, I can see it isnt goin to look good for you.

Fewer truck I can understand it takes 20min or more to dyno a truck and 50 show up and are upset because they don't get to dyno. But more $?????? The dyno is in the shop but it has to be warm out, maybe opening and closeing doors will let in to much cold air? I've never been to their shop so please fill us in. If heats a problem maybe a few of you guy have kerosen heaters to help with that problem.

I have been folowing this thread ever since it started and I cant believe what is happening...It looks like to me that the plan from the beginning was to start the price off low and get up the interest and then say SORRY but now we need 45 dollars a pull thats bull S..It seemed to me that everyone was wanting to get together and have some fun but now that everyone knows that the whole deal is crooked I doubt they will come...As for it being to COLD well I'm no Meteorologist but I'd say there is a pretty good chance of it being cold outside on Jan 10th....So lets build it up and Friday the 9th cancel....

Yeah I don't get the whole cold bit or raising the price. So with little interest it was $35 and now with more it's $45? Come on guys seriously are you kiddin? I still plan to dyno as to the others with me but to gouge us an extra $10? I would think the added publicity would do nothing but help the business. I don't want to run down BTS or those helping with the day but it does seem like an odd turn of events.

I wish someone would give us a little more info, why the sudden change.

Cuz they drive Fords..... No thats a Joke, had to bust some balls, but any way, Hey guys, if i could get a list started on who would want to dyno, and get aleast 20 trucks I'll host my own dyno day out at the fairgrounds here, but i would need aleast 20 truck, or i would be able to foot the bill. I'll see if i could get someone to sponsor door prizes, and high hp prizes.

Cuz they drive Fords..... No thats a Joke, had to bust some balls, .

[nonono][nonono][nonono][nonono][nonono][nonono][nonono][nonono][nonono][nonono]............................

Went out of town for the weekend sorry for the delay.

Guys im not really sure what happend myself. All I know is Cale called Ed and told him the stuff i posted. DON'T blame me for it please. Im not the one telling you this many trucks and this price and it has to be this warm ETC.... Im not someone who screws people over anyone that has met me can tell ya that....[nonono] AS for another Dyno day im up for it. I was thinking about having one in October or somthing in a large parking lot

Anywhere in the Branson area or tri-lakes area that this could be held?

there's nowhere cose except BTS that has a dyno that woud work with our trucks that i know of. there's one in springfield but it isn't anykind of load dyno. john is portable, but lives in kansas. it is bull crap them goin up on price though. i asked him what's the deal with that. i should hear something soon and will post my response. i'm sure we could do something big sometime somewhere. i'll ask around a bit and see what can be done about sponsors. corey holler at me and i'll see what i can do to help.

well i talked to cale. it was originaly discussed aproximately 12 trucks was goin to show. all of a sudden it's now tripled in attendance. which means alot more wear on the dyno. if this starts at 10am, and 40 tucks, 3 per hour, do the math. be done round 11pm. they are good guys and i don't blame them for the price change, especially since it's all of a sudden this attendance has been upped so much. cale's not money grubby i know for a fact s don't think that.

Thanks for looking into the raised price pack mule. I agree when they found there was interest they raised it. Nothing like kicking a man while he is already down.

I just spoke with Cale as well and it comes down to some miscommunication on my part. Guys its still on and there’s some open spots still left lmk if you want in.

well i talked to cale. it was originaly discussed aproximately 12 trucks was goin to show. all of a sudden it's now tripled in attendance. which means alot more wear on the dyno. if this starts at 10am, and 40 tucks, 3 per hour, do the math. be done round 11pm. they are good guys and i don't blame them for the price change, especially since it's all of a sudden this attendance has been upped so much. cale's not money grubby i know for a fact s don't think that.

What the he!! were they expecting. There are a lot of diesels in the area and there is nothing diesel oriented to do over the winter. It maybe more wear ont he dyno but why have it if that is all you are concerned about. I just don't feel like that is a justifyable reason to raise the prices. I realize that at 3 trucks an hour it would take all day which is fine but why was it talked up so much on this board and others if they didn't want a crowd? Pack I am not mouthing you and I appreciate you getting this info, I just feel that this event should have been a little more researched before they set a date and planned it. I still plan to attend just a little confused on the turn of events.

Well doesnt matter, i have a buddy real close one that owns this dyno, from Floor It diesel, so i'll host an event this spring, bring all the trucks you want, beer, women, poles, crabs, cars, tractors, beer, o wait, CRABS? No leave them little things some where else. No for real, if i can get the sponsors i will try to put somethin together

A spring event would be great.

I like this winter dyno event though like others have said it's nice to have a diesel gathering in the off season too. It could really be a big thing since there is no other events or nice out door work weather to compete.

exactly how many spots are left? i just read this whole thread and if i told some friends i could get 5-6 trucks including myself pretty easily but i dont wanna say anything and get everyone down there then not be able to dyno cause theres too many people ya know what i mean let me know thanks

xzaq103
You need to let us know the # of openings that are still available.

What about the temperature? Does it have to be above what temp? Does wind matter? A shop was mentioned? Can people get inside if it's cool out? If this is going to be a big event maybe some info can be passed out to the atttendess so we can help make it a better event.

Well doesnt matter, i have a buddy real close one that owns this dyno, from Floor It diesel, so i'll host an event this spring, bring all the trucks you want, beer, women, poles, crabs, cars, tractors, beer, o wait, CRABS? No leave them little things some where else. No for real, if i can get the sponsors i will try to put somethin together

Corey talk with straightpiperoar over on the diesel place. He has some ideas and possibly a place for the dyno day. If you can't get him there I will relay some info back and forth. For a small fee of course! [laugh]

Guys i have been really busy around here. Ill get back with you on all the details asap. as for spots left. Theres around 10 or so.

i will let my friends know and get back with someone tomorrow who do i need to contact to reserve a spot?

I think I'll wait to put my truck on a dyno, maybe after 3-4k miles atleast.

i got the number to bts and i will call there tomorrow and get the rest of the info i was needing to know about he dyno and put some names on the list hope to see you guys there

smokin- u pm me and let me know.

So what's the temp for us to watch for so we know if we need to come or not?

smokin-U, where are you located?

smokin-U, where are you located?
He is from Joplin, Where is Garry at anyone talked to him, wonder how the engine build is going for him

IM gonna call Cale today again. SOmetime this afternoon. Ill let you guys know.

On a side note anyone talk to Tristan lately?

I think he welded himself in a tank or something. Maybe someone else did.

im from joplin... Gary is doing good i think he just finished building his shop and has moved his truck in there to start tearing into it.got alot of work ahead of him. doesnt look like we are gonna make it down there, if we do it will be to watch only. would be nice to meet a few of you guys though

I think he welded himself in a tank or something. Maybe someone else did.Ole T-21, i kinda miss him around here, i think he will be back one of these days

I might have to go visit him just to make sure he's alive.
Any ideas on what temp they call to cold for dynoing?

no idea on a temp yet. most likely cold. don't know how cold it'll have to be for it to be called off.

Can you tell me why the temp matters? Isn't the dyno inside. Good chance in January it will be cold.

I think weather "cold" wasnt an issue it was getting the shop muddy. Im gonna go see Cale today so ill find out everything.

Muddy? If it's cold the ground will be froze so no mud. Do we all need to pitch in and help clean the shop when we're done or is this to protect the dyno?

Too muddy?

I shocked you guys aint said *uck it yet, i think this dyno day is turnin itto a joke,

i think ive heard it all when it is gonna be to muddy in a shop[dummy]

I dunno. I went up there today. Aside from being a ford shop it looks like its gonna be fun. Those of you who dont want to come dont have to lol. This is the first type of thing like this that i know of in this area for this time of year. There's been a few bumps in the road but you gotta start somewhere.

Well dangit we want to come but when they keep coming up with excuses and raising prices I begin to wonder if they want us or not.

I shocked you guys aint said *uck it yet, i think this dyno day is turnin itto a joke,

U talk to straightpipe yet? He may have some ideas in the works.

I wouldn’t say there coming up with excuses. That was there “See what the weather does” reason from the beginning. Guys I know there’s been more than a few set backs but its going to be some fun and I think its going to be a pretty good GTG.

U talk to straightpipe yet? He may have some ideas in the works.No i have not been on DP in a long time but if i get time later tonight i'll see if i can get him

hmm could i dyno the 1/2 ton diesel look alike just to blow it up haha

Yeah Ice man you can. BTW did you get that starter fixed???

No i have not been on DP in a long time but if i get time later tonight i'll see if i can get him

OK, I will tell him to check it out.

hmmmmmmm that's about all.

Their probably just scared a Dodge is going to show up and make their Ford look bad. Tell them Dodge boys it'll cost them more and it might be to cold for their Ford to run and a Dodge can handle the cold so they would really look bad.
I figure they won't have it again after a few Dodge's show them hows it's done.
Hate to see some of our best running trucks not show up and hand it to them just because their Ford is scared.

You have to respect what they have gotten out of that 7.3 It ain't like turning up a cummins or duramax. I not saying it will top the dyno but for what the truck is there sure have turned out some good #'s.

No disrespect. Just trying to get a few bad boys to show up and not walk out on the event because of their excuses. Then again maybe they've heard about some of us and don't want cops at their shop.

Cale knows Packs coming... lol I have to give it to them that 7.3 can run. As for guys putting down some power. Chris Blevins might be there and A guy I know named John in a dmax will be putting down some power. Last i heard Cale wasnt gonna spin the rollers.... Hmmm

My guess is a handfull of trucks in the 4s and 5s. Some in the 6s and a few in the 7s with one or two pushing for 8s. Im looking to get a 350[redface]

Well if Ole Midnight gits the sticks and pump put back in her by thin i may just drive on down but, its not looking like i even want to at this point.

How many spots are available for the dyno?

I really doubt that I even show up over there, if I do it will just be to bs a little.

[QUOTE=xzaq103;2327751 A guy I know named John in a dmax will be putting down some power.[/QUOTE]

Powell?????

Yes Powell... Talked to him yesterday and said he was having trouble with his heads so he got a set I believe from SoCal and said even if the new motor was not complete he would be there with the one that he has now...

Dodge06
Welcome to the DTR.
Fill out your signature so we know what your driveing a 06 2500? Where are you located.
You'r going to be at the dyno event?

The list i have made is at work. Ill let you know tomorrow. I think theres around 22 spots filled.

Chris.... You could just walk over if you wanted. IF it were two hours away id understand but comeon lol.

Yeah John Powell is the John I was talking about.

if i get the truck done in time me and a few friends might try to come and watch and if there is any opeings left we migth get on and dyno. dyno or not it would be nice to meet a few people from the area and watch some trucks spin the rollers

if i get the truck done in time me and a few friends might try to come and watch and if there is any opeings left we migth get on and dyno. dyno or not it would be nice to meet a few people from the area and watch some trucks spin the rollers

Hope to see you there.

Hope to see you there.

i second that

Thanks for the welcome Tree Dr.. I live around Branson,mo and I do drive an 06 just not a Dodge, GM man....Yea I will be coming to the dyno day...running with gearjammer and Hoffdog...

They user name is Dodge06 because I had planned on just making some smart A.... comments but found out that I knew a few more guys on here than I had first thought..Good forum

Oh no not another wana be. J/K Well you can always improve this way... Ya some decent folk on here.
Hope to see you the 10th.

Welcome 06 dmax can't wait to see that baby run.

Sounds like you done a few more things to the dmax

i still plan to win the lowest hp with the nasty. corey, quit bein a sissy and bring that black truck with ya. you know you wanna. besides, it'll be fun. oh, the cop remark, not funny. true, but not funny.

Welcome 06 dmax can't wait to see that baby run.

Have to be sunny and 60 or it won't get out of the shop!

Yeah Ice man you can. BTW did you get that starter fixed???

Starter?? i just got some loose wires somewhere so i have 2 move them around every once in awhile... one day i will listen to Pack and get rid of that pile

Have to be sunny and 60 or it won't get out of the shop!
LOL we'll see if gina comes out

gina you say..... would the first name be alota??? middle name fa????

lol ya somethin like that

So what's your low hp trucks #

i would havethe low hp truck if i could get it started but there is no way i am driving it that far from home. bone stock 88 7.3 my farm truck. has some internal issues probally a bent rod. imagine it would put down like 90hp or so

LOL we'll see if gina comes out


They all nicknamed my truck because I take extra good care of it..
[nonono]

They all nicknamed my truck because I take extra good care of it..
[nonono]

When was the last time it was started? Boys it lives in a climate controlled shop and doesn't leave unless it is 70 and sunny with a -20% chance of rain.
It's a glorified car..... [coffee]

They all nicknamed my truck because I take extra good care of it..
[nonono]

All you guys with your dyno and drag queen trucks.[yuk][roll]

One week away, is everything still a go? Any idea of the order in which we dyno?

Not really sure about the order but yes everything is stilla go.

Are there any dyno slots open still?

my spot will be open darren. i'll save it for ya.

Yes theres a handfull 8 or so lol

my spot will be open darren. i'll save it for ya.

You can't save me your's unless you pay and your going to give up your LHP trophy.
Hopefull some more people will show since there's still dyno time available. There will probably be several people who show up and then decide to dyno.
Weather sounds good so far.

were up to 25 give or take a few.

know the order yet?

biggest truck to smallest truck and if several are the same size, whoever made the longest trip goes first. does that sound good ducky??? i talked to pond water. he said he got to go back to work.

That sounds good Pack. biggest to smallest!

That sounds good Pack. biggest to smallest!

Trucks or???????

yes trucks. maybe i should have clarified that.

lol.........

talked to some friends of mine that went... sounds like it turned out pretty well. My two buddies got 1st and 2nd i guess. silver megacab dually and gray reg cab both third gens. wish i couldve made it!!

1. Grant Roark 814 w/nos 711w/o 1495 w/ 1270 w/o
2. Dale Stillings 752 1424
3. John Powell 741 1188
4. Justin Tyree 567 1016
5. Curtis Mathews 497 961
6. Austin Frutiger 446 691
7. Aaron Holt 428 857
8. Chris Lutrell 427 1006
9. Eric karr 404 904
10. Eddie Godat 377/321 no programer 871/745 no programmer
11. Jamie wood 339 782
12. Darin Reichard 281 560
13. Jimmy Powell 277 647
14. J.W. Jones 227/198 power puck 570/430 stock

Hey Chris can you list if they were dodge,gm,ford????

i think john powell was the only chevy there and there was on ford 6.0 but not to sure who he was though

i think john powell was the only chevy there and there was on ford 6.0 but not to sure who he was though

Hello
Who are you? Did you dyno?
I was in the 07 Chasis Cab. As you can see from my signature.
I didn't notice if you had filled out your signature. Helps us get to know you. I'd guess it's a 4x4.

it was fun. it's to bad the dyno was bein such a pain at first. everything was dodge except the 3rd place truck, 07 chevy and the 04 ford was 6th. puff put on a nice "little" burnout for us. then pondwater did.

Rough start to the day but turned into a nice event.

Hate to admit but we rolled out right after noon. To bad the dyno gave problems but also a little more organization might have been nice.

Hate to admit but we rolled out right after noon. To bad the dyno gave problems but also a little more organization might have been nice.

Wasn't their falt that the computer crashed, it was nice of them to spend all morning getting it up and going. You guys left just befor they got it working. I did notice you never came back. I guess I didn't talk to you or I just don't know who you are yet.

They got it working around 1. We all know how computer problems can be. Not a bad turnout and not bad #s

well we left a little after 1, figures that it started working after we left. What time did it get over? We was afraid to stay to much later after standing around for 4 hours.

I was after 5pm when I left.

I think it was around 6 when i left.

4x4 guy is Jesse He didnt run but was in that 96 12 valve

i did a lil burnout :)

talked to some friends of mine that went... sounds like it turned out pretty well. My two buddies got 1st and 2nd i guess. silver megacab dually and gray reg cab both third gens. wish i couldve made it!!

Does the gray mega have a single stack in the back and live in the Ozark area?

Wasn't their falt that the computer crashed, it was nice of them to spend all morning getting it up and going. You guys left just befor they got it working. I did notice you never came back. I guess I didn't talk to you or I just don't know who you are yet.

I realize it wasn't their fault. It just got old standing around freezing all day. Kudos to the people who supplied the prizes and coordinated this event. Hopefully another day can be scheduled in warmer weather. We all had plans Saturday night and needed to hit the road after we ate lunch.

I think it was around 6 when i left.

Even though I didn't dyno, thanks for getting this day together.

Does the gray mega have a single stack in the back and live in the Ozark area?

Both gray mega's had dual stacks I believe. One was from Cassville area I didn't catch where the other was from.

By the way where were you?????

I stayed around the house Saturday afternoon. Had a customer bringing 3 horses over for us to board while he goes to Hawaii this week. Wish it was me with the weather forecast they gave out. I'm going to have to put a new exhaust manifold on before the race in June. Mine finally decided to crack across the top. Had to put a new heater coil in it over the Christmas holiday break also. I doubt if I'm much over 600hp on the bottle right now with the Mach 4s. I need more fuel to go with the nitrous before I hit the dyno again.

yeah, a little burnout. teeny tiny. where was you mike??? to good to come hang out with us or what???? that hurts my feelings. i agree on the organization could have used some help. i attempted to keep it rolling some what smooth. it would have helped if i had known faces a bit more better. apparantly corey is trying to have one around spring time in raymondville area. i talked to him a few times. it'll be warmer and hopefully i'll get to do something this time. i'll let him tell about that though. video's of burnouts and dyno runs will be put on youtube soon hopefully.

i think i should've listened to corey to begin with and stayed home.

Then you wouldnt have got all that work done for free friday night!!!!

yeah, a little burnout. teeny tiny. where was you mike??? to good to come hang out with us or what???? that hurts my feelings. i agree on the organization could have used some help. i attempted to keep it rolling some what smooth. it would have helped if i had known faces a bit more better. apparantly corey is trying to have one around spring time in raymondville area. i talked to him a few times. it'll be warmer and hopefully i'll get to do something this time. i'll let him tell about that though. video's of burnouts and dyno runs will be put on youtube soon hopefully.

I need to get with him on this...I got the location if he's got the hook-up on the dyno!!!!

What's a chevy guy doing on our forum??????? LOL We'll let you hang out with us since you can't find any of your own kind.

What's a chevy guy doing on our forum??????? LOL We'll let you hang out with us since you can't find any of your own kind.

I was Dodge06 earlier but changed things up to keep my name the same on all the different sites... Not to highjack this thread but I heard some word of a 3 day event put on by St. Joseph Diesel Inc. in July and I will keep everyone posted on what goes on, dyno day, race day, and sled pullin day!!!!

Then you wouldnt have got all that work done for free friday night!!!!
thats no joke, thanks for all the help

Well the truck comes first lol.... thin i'll start on the dyno day. i guess it really wouldnt matter if mine is done or not. dont think i would dyno it anyway.

Does the gray mega have a single stack in the back and live in the Ozark area?The guy from ozark is Ken booth

No Ken wasn't there I did tell him about it though.

I see his truck all over the place but have never talked to him. The new neighbor's kid has a 2wd reg cab he is fixing up that I need to get on here. He was at the diesel race last year watching.

Isn't Ken affiliated with Ballies?

Does anyone know what he is running for modifications to his truck? I didn't notice whether he got on the dyno or not last year. I guess he sled pulls with it?

I met him at the strip around the first of last year he as was running the same setup that I had then 3 flows silver bullet II pump etc. he had a few problems getting it tuned it at that time. He was supposed to change a bunch of stuff up not for sure if he ever did or not, really nice guy to talk to though.

Did he try to run it through? What did it run? I guess it's a 6 speed with a dual disc?

He was in the 14.5 range its been awhile though, there was a d-max that he was trying to outrun and he was running in the high 13 range. Ya it was a 6speed DD southbend truck he had some kind of nitrous system on it too don't quote me on what it was though.

My 66mm charger is fixing to be for sale. I'm going to go ahead and put a 62-71-13SS on in preporation for twins. I would go ahead and use the bottle at the diesel race this year but since it's in the middle of hay season for me I guess I will run on diesel to save fixing another head gasket. Hoping to improve on the 12.84 pass. That is barring any truck problems or broken limbs from rodeo accidents.[laugh] [nonono] if you hear anyone looking for a good charger that's never been hooked to a sled pass the info along to them.

Isn't Ken affiliated with Ballies?
Yes he is......

He's tight with Ballies. He did have N on his for a while anyway. Had to make him unhook for one of the pulls, well make it so he couldn't slip one on anyway.

I think its a 150 shot or so..... Its a ZES

I've heard that thing hit the rev limiter a time or 2.

Is that bad?????

I spoke with Cale last night. He told me everyone should have there dyno charts by the end of the week. He also said he would like to thank everyone for being patient while the got the dyno fixed.

Thanks Chris. I'll probably talk to him today about my delete pipe.

Is that bad?????

Not at all.

Get that dyno day set up so I can dyno this thing with the delete pipe in now. I might have to go back down to BTS just to use the same dyno and see what if anything I've gained.

John Powel (the white dmax) is going back when he gets his new motor in. Might see if you can catch up with him and do it at the same time.

i really wish i could have made it down there. both the megacabs with dual stacks and the gy who won are from cassville. I'm just ready for sled pulling season to start back up again. I was pretty pleased with how my truck competed last year still running stock pump and injectors. if this dyno is comparable to floor its i would have like to seen what the truck put down since switching the tuing and adding the cam and pump! oh well next time i'm on a dyno it'll be a little better anyway

You guys that pull give us the web sites to the associations so we can plan to be at the pulls.
Lets get together before pulling season though. I'll start a new thread and poll to see when and where.

i pull with spring river mostly. i can post the schedule and rules when we get them this spring. usally seneca, neosho, cassville, aurora, monett, purdy, rogersville, nevada, stotts city, peirce city i believe

Im goin to try and stick where the payout is alittle better this season, and go to the bigger pulls.

Im goin to try and stick where the payout is alittle better this season, and go to the bigger pulls.

The more of us that know about the pull the more will be in them to make a better payout.
Of course you are in it to win and some of us just to have fun and watch. I'll have to find out what kind of abuse my aisin trans can take.

thats okay cory i'd prefer you not take all my money at least i'd be pulling for 3rd or 4th instead of 5th or 6th. lol

if my black truck could pull worth a crap id be in on that.

I met another soon to be puller last night in Owensville. He's trying to figure out a weight backet for his front end.

i'm just hoping to have mine running and not be locked back up again. i kinda made my probation officer mad at me and have a court date with the judge that thinks i'm a danger to society. me a danger, how funny is that??? call me darren about the pfd and let me know what he quoted you.

The more of us that know about the pull the more will be in them to make a better payout.
Of course you are in it to win and some of us just to have fun and watch. I'll have to find out what kind of abuse my aisin trans can take.No im not just out to win! I have alot of fun when im at these things. Its great to meet up with all you turds. Yes, taking a top spot everynow and then is cool. But i have just as much fun, if i got a 3rd or 4th. It depends on the line of trucks that ur up against also.
Best thing about me, not sure where ill pull next. I may be at a pull in KY one night, and your hometown pull the next.[laugh]

i'm just hoping to have mine running and not be locked back up again. i kinda made my probation officer mad at me and have a court date with the judge that thinks i'm a danger to society. me a danger, how funny is that??? call me darren about the pfd and let me know what he quoted you.

I don't have your # and what pfd? You a danger!!! Oh it's Darin by the way.

And Corey if you win them all it would be great. It would just make the rest try harder.

i'm just hoping to have mine running and not be locked back up again. i kinda made my probation officer mad at me and have a court date with the judge that thinks i'm a danger to society. me a danger, how funny is that??? call me darren about the pfd and let me know what he quoted you.

.... no comment

ducky, i have two words for ya. one sounds rhymes with cluck the other is you. PFD Darin is particulate filter delete. you said you was talkin to cale about it. eight seven zero, five seven seven, two zero seven six.

Cale didn't quote me anything. I did the DPF delete myself. I'm looking at haveing some delete pipes made. Ok I'll try to give you a call tomorrow.