APPS/VP44/47RE and queer electrons
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: In the middle of Weather Dry Creek Farm in Avilla, Arkansas
Posts: 161
Likes: 0
Received 1 Like
on
1 Post
APPS/VP44/47RE and queer electrons
I've recently noticed a number of posts dealing with problems relating to the mentioned items. I also have had problems relating to those items.
Here is what I've found. GROUND, GROUND, GROUND
With the use of digital electronics on the later model vehicles, little gremlins, AKA voltage spikes, will drive the electronic controls nuts. Insure your battery connections are CLEAN. Check ALL the ground leads coming off of everything electronic and clean them to ensure good metal to metal contact. Unless the spike is large or for a long duration, you cannot see them with a DVM. I ended up hooking a digital storage scope to the DC source and recorded the output over a 45 minute period. UGLY looking trace. All kinds of grass growing out of the flat line. Noise was very noticable in the 1100 - 1500 rpm range.
Spent a couple of hours yesterday afternoon cleaning ground AND B+ points. The problems I had went away and the truck runs like it has another 25 hp. Much smoother shifts and no gear hunting from the tranny. Overhead mpg indicates ~ a 1.7 mpg increase. Makes sense to me.
This public service message was brought to you by Shortround and the wonderful tools available in the Bat Cave.
ain'tlookinglikeanAPPSorIPanymoreShortround out
Here is what I've found. GROUND, GROUND, GROUND
With the use of digital electronics on the later model vehicles, little gremlins, AKA voltage spikes, will drive the electronic controls nuts. Insure your battery connections are CLEAN. Check ALL the ground leads coming off of everything electronic and clean them to ensure good metal to metal contact. Unless the spike is large or for a long duration, you cannot see them with a DVM. I ended up hooking a digital storage scope to the DC source and recorded the output over a 45 minute period. UGLY looking trace. All kinds of grass growing out of the flat line. Noise was very noticable in the 1100 - 1500 rpm range.
Spent a couple of hours yesterday afternoon cleaning ground AND B+ points. The problems I had went away and the truck runs like it has another 25 hp. Much smoother shifts and no gear hunting from the tranny. Overhead mpg indicates ~ a 1.7 mpg increase. Makes sense to me.
This public service message was brought to you by Shortround and the wonderful tools available in the Bat Cave.
ain'tlookinglikeanAPPSorIPanymoreShortround out
#3
Registered User
Join Date: Apr 2004
Location: New Meadows, Idaho
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
I gather to clean all your ground points down to metal again? I hope you put a bit of di-electric grease there to retard the rust growth. It would suck to have to chase it again...
#4
Chapter President
Join Date: Nov 2003
Location: Rural Hall, NC
Posts: 3,807
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by shortround
I've recently noticed a number of posts dealing with problems relating to the mentioned items. I also have had problems relating to those items.
Here is what I've found. GROUND, GROUND, GROUND
With the use of digital electronics on the later model vehicles, little gremlins, AKA voltage spikes, will drive the electronic controls nuts. Insure your battery connections are CLEAN. Check ALL the ground leads coming off of everything electronic and clean them to ensure good metal to metal contact. Unless the spike is large or for a long duration, you cannot see them with a DVM. I ended up hooking a digital storage scope to the DC source and recorded the output over a 45 minute period. UGLY looking trace. All kinds of grass growing out of the flat line. Noise was very noticable in the 1100 - 1500 rpm range.
Spent a couple of hours yesterday afternoon cleaning ground AND B+ points. The problems I had went away and the truck runs like it has another 25 hp. Much smoother shifts and no gear hunting from the tranny. Overhead mpg indicates ~ a 1.7 mpg increase. Makes sense to me.
This public service message was brought to you by Shortround and the wonderful tools available in the Bat Cave.
ain'tlookinglikeanAPPSorIPanymoreShortround out
Here is what I've found. GROUND, GROUND, GROUND
With the use of digital electronics on the later model vehicles, little gremlins, AKA voltage spikes, will drive the electronic controls nuts. Insure your battery connections are CLEAN. Check ALL the ground leads coming off of everything electronic and clean them to ensure good metal to metal contact. Unless the spike is large or for a long duration, you cannot see them with a DVM. I ended up hooking a digital storage scope to the DC source and recorded the output over a 45 minute period. UGLY looking trace. All kinds of grass growing out of the flat line. Noise was very noticable in the 1100 - 1500 rpm range.
Spent a couple of hours yesterday afternoon cleaning ground AND B+ points. The problems I had went away and the truck runs like it has another 25 hp. Much smoother shifts and no gear hunting from the tranny. Overhead mpg indicates ~ a 1.7 mpg increase. Makes sense to me.
This public service message was brought to you by Shortround and the wonderful tools available in the Bat Cave.
ain'tlookinglikeanAPPSorIPanymoreShortround out
Thanks
Thread
Thread Starter
Forum
Replies
Last Post