silver03

I was looking for a performance upgrade and ran across this web site. Are the HP numbers correct? What about the quality of this product.

http://www.pacificp.com/computer.htm#dodgeexcel1

B.Law

There was a thread about this box not too long ago, check it out here... https://www.dieseltruckresource.com/...ight=injectors

Gypsyman

There's also an ongoing thread over at the TDR. They're just waiting on some dyno repairs to get the numbers put up.

joeservo

Silver03, is this what you need to beat Tomac at the pulls?

silver03

Joeservo, It has already been proven at many events that silver 03 has beaten Tomac.
Just looking for a way to put another 10 feet on top of the 10 feet I beat him by now.

Dennis, It sure would be nice to have one of those adjustable Ramifier so I could adjust
my power levels. Maybe something custom like setting #1 beat him by 5 feet, setting #2 beat him buy 10 feet, setting #3 beat him buy 15 feet and turned all the way up keep it on the trailer!!!!

PourinDiesel

Whos got the hottest 3rd gen pulling truck out there?

Floor It

Hard to say? all I know is that there should be alot of third GEN's kicking butt this year!

John

PourinDiesel

Got that right John!

mtomac

Just to clear up some misinformation posted by silver 03. I've pulled against silver 03 twice beating him by 4.93' at the TTPA pull in Mt. Morris, MI and him beating me by 4.50' at the EEP charity pull in Glenford, OH the other time. This was the 1st and only time an 03 or 04 Cummins had gotten ahead of me all season long.

Face it Silver03 you know you need more than what you have now to beat me and you know I won't have a stock turbo and stock injectors next season and you're worried.

Silver03, did you forget about the pull in Elkton, MI where a fellow Duramax puller beat you by 31' when I was out of state pulling in Ohio?

digger5.9ho

Tomac, Tomac, Tomac,

Maybe next year Silver03 will STRAP HIS SUSPENSION, HANG A LOT OF WEIGHT, GET A LOCKER, like you had last year when you got lucky. I thought it was very funny how when I was talking to you and your pit crew before the pull at Mt. Morris that your truck was on jack stands being wrenched on. When Silver03 pulled with no wrenching needed and the box on halfway.

Mike you had better start stocking up on the tissues now.

digger

kwikspool

WOW There sure is alot of hostility going on! Can't everyone just get along or have fun pulling???

mtomac-when is john getting your injectors?

mtomac

kwikspool, I'm just swapping nozzles so there' s no rush. I'm buying a set of already honed nozzles, replacing mine and sending back mine as cores.

kwikspool

mtomac aren't they around 100 a tip? Besides I think your gonna run into the same problem we did on the Gen 3's.

BigBlue

This is starting to sound like a corvette forum.

Back on topic, anybody heard anything new on the box mentioned earlier in this thread.