Anyone Put Child Seats in the Rear of Quad Cab?
#1
Anyone Put Child Seats in the Rear of Quad Cab?
I just bought an 01 and am trying to figure out how to put my kids booster and carseat in the back. The shoulder straps don't seem to lock when you pull them quickly. I'm worried it won't hold the seat in tight. Anyone else have this issue? What have you done?
Nik
Nik
#2
Registered User
Join Date: Jul 2005
Location: Colorado Springs
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
I have 1 booster and a rear facing car seat in the back seat and one more with nothing but a seat belt. No issues outside of leg room for the older DD (9 yr old).
I honestly never checked if the shoulder harness locked but haven't on the Durango either.
I thought I read there was an electrical connection that was faulty on some of the driver and pass seats causing them to lock all the time (not your issue). Maybe the rears are the same??? I don't think they are like the old style we had that take a fast motion foreward to lock or a quick jerk and jerk again and then they lock. I could be wrong thought
I honestly never checked if the shoulder harness locked but haven't on the Durango either.
I thought I read there was an electrical connection that was faulty on some of the driver and pass seats causing them to lock all the time (not your issue). Maybe the rears are the same??? I don't think they are like the old style we had that take a fast motion foreward to lock or a quick jerk and jerk again and then they lock. I could be wrong thought
#4
Registered User
Yea...it's a PITA! Pretty much zero room in the bs for a car seat. Whatever you do don't install it behind the driver seat as you'll be driving w/the steering wheel in your chest. This was the reason I was thinking of a 2nd gen mega-cab.
#5
Registered User
The buckles themselves supply the tension if you pull upwards on them. They lock down pretty tight. I have had all three in their carseats at one time and the seat belts hold them in tight even after a ten hour trip. The recoil mechanism doesn't need to ratchet to lock to hold them tightly.
Kurt
Kurt
#7
Registered User
By law and according to age they must ride backwards. I don't see how you have any room to have the setup in the back seat and keep from having the front seat crammed against the dash?
Trending Topics
#8
Nik
#10
Registered User
Join Date: Mar 2006
Location: Port Crane (Binghamton) NY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Yea, reverse facing is like 1 year old here in NY as well. and 40Lb's and so tall is a booster. I had my girlfriend's 15 month old girl, and my 4 year old in the back of my club cab and it wasent pleasant. Doable, but, roomy is NOT a word I would use.
#11
Registered User
We put rear facing child seat in middle back. Locks with regular buckle. Front facing in same place with harness type child seat. Booster seat goes on passenger side with 3 pool tube thingys cut up and taped together and placed behind lower part of booster seat so kid can at least recline a little. We leave the top of the booster seat on even though he's old enough to just have the bottom because there are no rear headrests. PITA, yes, but doable....
Thread
Thread Starter
Forum
Replies
Last Post
agcntry
4th Gen Ram -Non Drivetrain- 2010 and Up
1
02-10-2012 08:36 AM
williamdr
3rd Generation Ram - Non Drivetrain - All Years
13
10-20-2007 09:39 PM
MegaCabinPA
3rd Generation Ram - Non Drivetrain - All Years
16
09-20-2007 10:50 AM
plug ugly
3rd Gen High Performance and Accessories (5.9L Only)
3
08-07-2007 11:29 AM