GlennRMK

Ok, I have a nice little keyless entry system for my truck. Couldn't see $200 for the factory one.

I already know were the parking light and constant wires are from hooking up my gauges.

I've done a remote start/keyless entry in a Chevy once, so in comparison, this should be a breeze. I wouldn't recommend doing the remote starts yourself. Not that its hard, just time consuming.

But my question, is what type of system is the door unlocking setup.

I found this: Bulldog Security wiring diagram

Anyone verify what system our trucks are? I have an 01 SLT with power locks/windows and overhead console. I am assuming its a Type C (+) Reversing Polarity.

My keyless system has 6 outputs available, so I'm assuming I should use the 6 pin diagram. However, mine is not a Bulldog.

What do you guys think?

tmacie

I'm glad you dont have the bulldog....ugh. It's a 5 wire setup....go here and you can lookup the wire colors and locations.

http://www.the12volt.com/

Travis

I SPEED

Definately a 5 wire setup. You may need to wire up a couple of relays if the piece your installing does not have on-board relays. What brand is the keyless you have?

Here are the wire colors and locations you need.

DIRECTWIRE™ WIRING INFORMATION - DODGE / RAM PICKUP / 2001 / Keyless Entry



12volts red and pink/black + ignition harness

Starter yellow + ignition harness

Ignition dk. blue + ignition harness

Power Lock orange/purple 5wi driver door harness

Power Unlock pink/purple 5wi driver door harness

Parking Lights+ black/yellow headlight switch

Door Trigger yellow - headlight switch