Anyone else run into this problem?
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Clarksburg, WV
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Anyone else run into this problem?
After FASS 150 HPFP install and mods in my sig my FP pulls down pretty easily untill the FASS eventually shuts down. The newer FASS units have a safety feature that shuts the pump down when resistance is detected. Anyway, do y'all figure the stock draw straw and screen is my weak link? Fuel filter is new and I have a big line kit. Any thoughts?
#2
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
Not really sure what the problem is, but I drove my truck with the 150 GPH FASS with stock draw straw, and never had low fuel pressure or shut down issues. I gained about 1 psi pressure when I put in the bigger draw straw.
Thread
Thread Starter
Forum
Replies
Last Post
littlebigtruck
3rd Gen High Performance and Accessories (5.9L Only)
1
08-12-2010 10:19 AM
turbov6joe
3rd Gen Engine and Drivetrain -> 2003-2007
18
12-04-2008 08:15 PM
moparsupremist
1st Gen. Ram - All Topics
7
04-24-2005 01:12 AM
GotCummins?
3rd Generation Ram - Non Drivetrain - All Years
22
06-15-2004 10:31 AM