fullbore farmer

any body ever have these codes p2146, 2149, and what was the problem and how was it fixed. The truck died and then i got it started and got it home and these were the codes i got out of it any help would be appreciated.

new2ctd

https://www.dieseltruckresource.com/...ighlight=p2146

This guy had them very recently

So you running an Edge?

nathan04

Since I posted that thread I have not had anymore issues. I think my problem was not allowing the truck to completely warm up to 174 degrees before turning my Edge on level 5.

fullbore farmer

i hope that is the problem because i did have my juice on 5 and truck wasnt fully warmed up, and that is the first time that this has ever happened in 2 years. Also the truck completly died but then started up right away

CG98x

I will get these every time with my edge if I change settings and then immediately get on it. If I wait for 10-15 seconds all is well.

BUSAHAULER

Call edge and get on '' the list". I am on it with a lot of other people. they were supposed to have the fix ready in early mid march. but they are still testing the new program. i even volunteered to test the fix but i got nothing. but since i have had my third fcm installed i havent gotten a code. but im not gona tell them that.

03 ant a hemi

The Edge isnt suppose to enchance power untill the temps are at the normal operating range. If this is correct then why would it throw this code.

On a side Note my truck in stock form has thrown this code.

RamWheelsBy4

I ran the Juice/Attitude and then the HOT Juice/Attitude and EZ stacked for 8 or 9 months and never threw a code. I was always careful to wait for normal running temps before I got in it, but it saw a lot of very hard runs at the track. That was a while back and on my 04.5, but that was the most trouble free stack I have had so far.

bigredBCS

same thing with me. i tried runnign it hard plenty of times before it warmed up never had that problem ,then a few months ago it did. hasnt since