Another tire question
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Lorimor, IA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Another tire question
Just wondering if anyone has ever ran 305/70-16 on the rear of a 2wd with stock rims. Found a good deal on a pair but don't know if there would be issues with rim width or clearance. This would be with 265/75-16 on the front. Any help would be appreciated.
#2
Registered User
Join Date: Apr 2005
Location: Somewhere cold
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
The only 2 things that come to mind is,
1. How wide are the factory rims? If they are too skinny the 305's might be too wide.
2. Your speedo will be showing a bit slower that your actual speed.
They should fit the truck though, I run 285's on my '01
1. How wide are the factory rims? If they are too skinny the 305's might be too wide.
2. Your speedo will be showing a bit slower that your actual speed.
They should fit the truck though, I run 285's on my '01
#3
Registered User
Thread Starter
Join Date: Dec 2003
Location: Lorimor, IA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
My speedometer is off already. According to the calculator I used, I will be going 64.28mph when speedometer reads 60mph. This would actually be a correction since right now I'm off about that far the other way.
#4
Registered User
Check TireRack.com for the tires and look at the specs for how small a rim you can run. If you have steel wheels they are 6.5", alloys are 8". For that tire size, I believe you will need an 8-9.5ish inch rim size.
Thread
Thread Starter
Forum
Replies
Last Post
Jezzhuntin
General Diesel Discussion
17
08-25-2006 02:51 PM
Badd Dogg Guy19
3rd Generation Ram - Non Drivetrain - All Years
17
10-24-2005 12:12 AM
Sea:\>Drive
Performance and Accessories 2nd gen only
11
07-19-2005 04:52 PM
rwolf
3rd Generation Ram - Non Drivetrain - All Years
4
09-14-2004 04:47 AM