Airdog or FASS mounting?
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW Chicago Suburbs
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Airdog or FASS mounting?
I have an after market CM hauler bed on my 3500. I am wondering will one system work better then the other as far as mounting? Do they both mount to the frame? Any have mounting pictures? I prefer the Airdog as I have had an Airdog on another truck and loved it.
Any insight would be great. Thanks
Any insight would be great. Thanks
#4
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
Here's my AD100 with the Raptor mounting hardware so it runs parallel to the frame rather than perpendicular to it. It's pretty close to the skid plate so it's fairly well protected.
Also if you mount the pump with the sticker facing the frame you end up with 2 of the 3 hoses pointing the right direction.
Also if you mount the pump with the sticker facing the frame you end up with 2 of the 3 hoses pointing the right direction.
#6
Guest
Posts: n/a
Hmm... Interesting cause I can think of quite a few things that are different. You say only stickers are different huh? Somebody must have shrunk ours or swelled theirs up. Cause they look different in many ways. Internally they are different as well. Just to get you up to speed a little on the 2. Not so much exact at all if you ask me. Both systems are out to perform the exact same duties yes. But they are not exact at all.
Thread
Thread Starter
Forum
Replies
Last Post
lastcall190
3rd Gen High Performance and Accessories (5.9L Only)
3
04-16-2011 02:59 PM
clndesl
3rd Gen High Performance and Accessories (5.9L Only)
15
02-16-2009 12:12 PM
kdbvulcan
3rd Gen High Performance and Accessories (5.9L Only)
20
12-06-2008 04:34 PM