Air Intake
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Montrose, Co
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Air Intake
I pulled the air intake off my rig for better access to the fuel lines and AFC housing and the gaskets fell apart, namely the one under the heater. I was wondering if I could make one out of silicone or if I need a good gasket. My mods are below and I was pulling 35psi boost before the timing ang injectors and gsk. I haven't drove the truck with the injectors, gsk, timing, and new overflow valve. I'm not sure what boost to expect but I'm up at about 6000 feet and was wondering if the old gaskets would hold up or if I need to up grade. I've had the intake off before and reinstalled it with old gaskets and saw no signs of leaks. I have a few friends with bombed ctds and none of them see as much boost as mine did. Is this a lot of boost or am I in the clear?
#6
Chapter President
http://www.cumminsdatabase.com/read.php?id=111
Trending Topics
#8
Chapter President
Thread
Thread Starter
Forum
Replies
Last Post
Taquache
3rd Gen High Performance and Accessories (5.9L Only)
21
06-24-2012 03:11 PM
Dodgewincity
3rd Gen High Performance and Accessories (5.9L Only)
13
01-19-2008 05:41 AM
D45
3rd Gen High Performance and Accessories (5.9L Only)
17
12-06-2007 01:52 PM
BA05'CTD
3rd Gen High Performance and Accessories (5.9L Only)
4
01-07-2007 03:08 PM