air dog 150/ fuel gauge problems
02-18-2010, 12:42 AM
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: humble
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
air dog 150/ fuel gauge problems
Since I installed my pump my fuel gauge has been off. Has anyone had this before? Is there a way to calibrate it. Thanks
02-19-2010, 12:22 PM
#3
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
did you pull the canister and run the lines thru the can? if so, you have the canister turned and the float is hitting the side of the tank and not allowing it to go thru full travel
02-19-2010, 12:25 PM
#4
Registered User
Join Date: Nov 2006
Location: Muskego, WI
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
What are you trying to calibrate?? The fuel pump or guage. If it on the pump, I would talk with airdog to see if they can either send you an adjustable pressure regulator like on the 165 II pumps or a different spring set.
Just as an FYI, I have my pressure adjustment screw turned all the way so that the adjustment screw is flush with the lock nut & I'm at 22psi.
Just as an FYI, I have my pressure adjustment screw turned all the way so that the adjustment screw is flush with the lock nut & I'm at 22psi.
Thread
Thread Starter
Forum
Replies
Last Post
dodge350c
1st Gen. Ram - All Topics
6
11-06-2013 04:18 PM
ghstrider87
3rd Gen High Performance and Accessories (5.9L Only)
6
07-28-2011 08:07 AM
trailinone
3rd Gen High Performance and Accessories (5.9L Only)
16
06-19-2009 04:28 PM
diggity dodge
3rd Gen High Performance and Accessories (5.9L Only)
2
05-03-2008 12:42 AM
heavyJ
Performance and Accessories 2nd gen only
12
10-25-2007 09:08 AM