TUGUM

wondering if anyone is running a aeroturbine res style muff,mine is open with 5 in rolled tip sounds raspy at idle& has 70mph drone
but i like the slight cackle it had under acc. btw read sig thanks in advance

OT-OF-Here

I've run my 600 with just the Aeroturbine and placed it where the cat was before it's accident,...too loud for me. Then I left the Aeroturbine in that position and put a 26" Donaldson where my muffler was before it's accident,...now it's just right. I also added two factory style rubber mounted type supports further up on the exhaust pipe as I felt too much weight was hanging unsupported and may be causing my droan at 2k rpm. Now no droan. And my Donaldson feeds into twin exhaust,...cool look in my opinion with 5" tips. They have a picture on dieselpowerproducts.com.

TUGUM

it doesn't sound like a bread truck does it, i ha d a 30-35 in proflo before and it sounded like a bread truck. what size are your duals.thanks

OT-OF-Here

No bread truck here. It's louder than a stocker by about half again, and between that mod and the AFE it's a quite cool sound I think. I also get a nice rumble with the SRT-10 hood with the open scoop. The duals are 4". Everything is stout and you could do chin ups all day on that system.

TUGUM

were you able to buy just the tailpipes if so from where. thankya

OT-OF-Here

I bought the whole Silverline system to get my duals. I think there is a place that you can get the adapter which takes it from the outlet of the 4"muffler into a twin 4" outlet for the tailpipes and tips. It's something like ANCO or ALCO. Can't recall just now but I heard of them later after I had bought my set. If I recall I'll get back with you. You might try a net searcha and see if anything is close to that for exhaust manufacturers. They're not just an outlet but a manufacturer. They sell both standard and stainless. Later.