12valve

After putting on a oringed head, a 2nd gen headgasket, i think i should adjust the valves,

What are the valve lash specs for a 2006 CR with say around 750 HP?

I lost the sticker on the valve cover...

Any tips are appreciated too.

wap

I THINK on my 05 its .020 and .010, but I would need to double check, and while I would also THINK the 06 is the same I am not 100%.

Jame

factory spec with coolant less than 140F is .010 intake .026 exhaust

12valve

thanks Jame

dieselfan

why a 2nd gen HG? is it b/c of o-rings?

82NDSNPR

the hp dont matter and the valve lash is found on the side of the valve cover thats where i found mine

Howling

Yes the 2nd gen gasket is usually water jetted for the size of the oring.

dieselfan

thank you

12valve

I dont know what you mean with that right there...
can you clear that up for me?

BTW i just used The 2nd gen HG the way it came... hope i did the right thing...