3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!
Sponsored by:
Sponsored by: DashLynx

abs light &ebrake light???help

Thread Tools
 
Search this Thread
 
Old 02-20-2010, 07:52 PM
  #1  
Registered User
Thread Starter
 
aspen's Avatar
 
Join Date: Feb 2010
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
abs light &ebrake light???help

where do i start?on getting this lights to one day stop..any suggestions
Old 02-20-2010, 08:08 PM
  #2  
Registered User
 
ptm600's Avatar
 
Join Date: Jan 2005
Location: Northwestern PA
Posts: 278
Likes: 0
Received 6 Likes on 4 Posts
I have the same problem with mine. I think it is related to the plug or wire for the abs sensor that goes to one of my front wheels. Mine only comes on when I make a hard left turn. My guess is it's my plug on the passengers side. You may want to check your connections.
Old 02-21-2010, 06:07 PM
  #3  
Registered User
 
dwl2002navy's Avatar
 
Join Date: Sep 2008
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
I had the same problem for a year, and finally after changing the second rear wheel speed sensor we peeled back some of the wire protector and noticed a wire was broken inside the sheathing. It was right next to the connector in the rear. My buddy and I patched it up and it works perfectly! Good luck.
Old 02-21-2010, 06:24 PM
  #4  
Registered User
 
ShutupAndHoldOn's Avatar
 
Join Date: Oct 2006
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
I had this problem and it was a sensor wire that was loose and would only light when it was cold out. I don't recall where it was exactly but it wasn't on the front end. It was either the trans or diff.
Old 02-21-2010, 07:59 PM
  #5  
Registered User
 
SpLaT's Avatar
 
Join Date: Feb 2008
Location: Alberta
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
check the sensor on the rear differential... as dwl2002navy said "broken wire" or a rock has done a number on the sensor terminal on top of the diff. if the terminal has been damaged or cracked water gets in there and messes things up.
Old 02-21-2010, 08:02 PM
  #6  
Registered User
 
puffsmokeonya's Avatar
 
Join Date: Aug 2007
Location: harrison arkansas
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
mine did that and i had a wheel bearing out.
Old 02-21-2010, 08:03 PM
  #7  
Registered User
 
Chris Martin's Avatar
 
Join Date: Sep 2006
Location: Goderich Ontario Canada
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
just fixed mine on friday. The clip on the ahle tube thats holds the wiring harness broke so the harness was rubbing against the rear stabalizer link. Wore through the wire. Found this AFTER i put a new sensor in the top of the rear diff.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
petrecca8
1st Gen. Ram - All Topics
9
07-24-2010 07:37 PM
BigBore050
HELP!
7
03-09-2010 11:46 PM
mr T
2nd Gen. Dodge Ram - No Drivetrain
10
02-24-2007 06:42 AM
kcbarnes
3rd Gen Engine and Drivetrain -> 2003-2007
18
03-07-2005 10:16 AM
rock
3rd Gen Engine and Drivetrain -> 2003-2007
10
12-04-2004 01:57 AM



Quick Reply: abs light &ebrake light???help



All times are GMT -5. The time now is 05:35 PM.