12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

'94 CTD Won't go into "OVerdrive"

Old 04-21-2007, 05:51 PM
  #1  
Registered User
Thread Starter
 
RoadDiesel's Avatar
 
Join Date: Mar 2007
Posts: 130
Received 1 Like on 1 Post
'94 CTD Won't go into "OVerdrive"

..Had it parked most of the winter..205,000 miles on. worked fine a month ago ..I checked the TPS it was 5.3 volts at what would be Idle..at WOT it was 4.9 volts..it would not go less than the 4.9volts.. book calles for .5 to 3.5 varrance..any suggestions what to check next..new TPS?? ( changed trans fluid and filter, with bands adjusted last fall).I did a search first and found some info..but could use some help now..thanks in advance..
Old 04-24-2007, 08:37 PM
  #2  
Registered User
Thread Starter
 
RoadDiesel's Avatar
 
Join Date: Mar 2007
Posts: 130
Received 1 Like on 1 Post
..Replaced the "Notorious " failed TPS senser, and works like a new truck again....

Bought a new oem one from the dodge dealer for $179.00..retails for $224.00..Now on to the water leak...lol
Old 04-25-2007, 12:14 AM
  #3  
Registered User
 
mr T's Avatar
 
Join Date: Mar 2004
Location: Austin, TX, Toronto, ON
Posts: 1,488
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RoadDiesel
..Had it parked most of the winter..205,000 miles on. worked fine a month ago ..I checked the TPS it was 5.3 volts at what would be Idle..at WOT it was 4.9 volts..it would not go less than the 4.9volts.. book calles for .5 to 3.5 varrance..any suggestions what to check next..new TPS?? ( changed trans fluid and filter, with bands adjusted last fall).I did a search first and found some info..but could use some help now..thanks in advance..
first thing u do is adjust ur brake pedal swicth...its free and takes 5 seconds...get under ur brake pedal...there's a **** that touches the brake pedal at rest...push the pedal down and pull out the **** and let the pedal come back...voila adjusted...you'll hear a couple clicks...what happens is that when the ****/switch is not adjusted, the truck thinks the brakes are engaged and ur TC lock-up as well as OD will not work.....

after that i would check and clean all connections followed by taking the wires that lead up to the TPS out of the loom...often times the wires get interference from engine vibration..taking them out of the loom is a common mod and fix
Old 04-25-2007, 06:22 AM
  #4  
Registered User
Thread Starter
 
RoadDiesel's Avatar
 
Join Date: Mar 2007
Posts: 130
Received 1 Like on 1 Post
..thanks Mr T ..your right about the brake switch..heard about that ..I did have to replace the brake switch during the fall last year...So in my case, I ruled that part out..like my 2nd post said..it came down to the TPS sensor was bad..bought a new one, installed it yesterday...and it works like a new truck again..my next project is the KDP this weekend and find that #@**! water leak in the cab..lol thanks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TREK
1st Gen. Ram - All Topics
8
12-08-2014 09:58 AM
flyingd
24 Valve Engine and Drivetrain
0
11-26-2012 02:21 PM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
Mexstan
Other
17
01-21-2006 02:43 PM
Nicholas
HELP!
1
12-24-2002 06:02 AM


Thread Tools
Search this Thread
Quick Reply: '94 CTD Won't go into "OVerdrive"



All times are GMT -5. The time now is 04:31 AM.