94 -2500 4x4 4wheel drive unit
#1
Registered User
Thread Starter
Join Date: May 2008
Location: Westland ,MI
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
94 -2500 4x4 4wheel drive unit
Ok here's the problem My 4 wheel indiactor isn't working I depressed the pluger on the switch but nothing I also tried jumping the wire to make the light work still nothing is there something I am missing I am trying to find out if it's the axle accuator or something else It has 160k on it and I have not replaced anything on the 4 wheel drive at all yet it worked fine last year now no light and I am not sure it's engaging
#4
Trying to trouble shoot those units is like pushing a rope. To test the light you need to get into the dash, to test the actuator you need to remove it and get help cycling it. If it is the relay, good luck trying to test that. When you are near 100 you will find the problem.
My solution is to simply replace the OEM junk with a Posi-Lok manual shift system. If the cable is pulled you are locked!
My solution is to simply replace the OEM junk with a Posi-Lok manual shift system. If the cable is pulled you are locked!
#5
Registered User
$30 Posi-Loc> http://www.jeepforum.com/forum/showthread.php?t=595515
Thread
Thread Starter
Forum
Replies
Last Post
Jim Weed
3rd Gen Engine and Drivetrain -> 2003-2007
11
03-18-2005 04:07 PM