92 D250 dually project
11-24-2010, 07:55 PM
#1
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
92 D250 dually project
Hey everyone, I'm new to the forum. thought i should make a thread for my junk.
here's my 92 d250. making it a dually and building a flatbed for it. motor is mostly stock.pump has been turned up and it has a 3200 spring and different fuel pin(done by previous owner).over 200k miles and still going strong. just picked up an 88 d350 for a parts donor.i'll post updates when i get the chance.
my other toy...
Happy thanksgiving!
Greg
here's my 92 d250. making it a dually and building a flatbed for it. motor is mostly stock.pump has been turned up and it has a 3200 spring and different fuel pin(done by previous owner).over 200k miles and still going strong. just picked up an 88 d350 for a parts donor.i'll post updates when i get the chance.
my other toy...
Happy thanksgiving!
Greg
11-26-2010, 08:22 PM
#4
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
so i got a little carried away with the torch today, not much left of the back of my 88 parts donor...
aren't they cute
the 88 was an ex state truck.. most all of the sheet metal is in good shape. going to use the rockers, cab corners and fenders on the cummins...
aren't they cute
the 88 was an ex state truck.. most all of the sheet metal is in good shape. going to use the rockers, cab corners and fenders on the cummins...
Trending Topics
01-16-2011, 01:21 AM
#8
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
got the rockers swapped over and the doors hung. picked up a set of ramcharger mirrors on ebay for 20 bucks.. i like the looks of them
came across a set of wheel covers for cheap.... they're just resting on the truck for motivation
came across a set of wheel covers for cheap.... they're just resting on the truck for motivation
01-23-2011, 08:40 PM
#9
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
4 inch downpipe?....check
got the holes drilled for roof lights..
fenders and hood are back on.. need to align everything so i can finish the bodywork
once the body work is done i'll rebuild the front end with new control arm bushings, ball joints, brakes, and get the dually bubs on...
got the holes drilled for roof lights..
fenders and hood are back on.. need to align everything so i can finish the bodywork
once the body work is done i'll rebuild the front end with new control arm bushings, ball joints, brakes, and get the dually bubs on...
02-27-2011, 12:59 AM
#10
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
took the week off from work to get some things done....goal is to have it "finished" in may, just in time for prom
put new brakes on the front and rear. ran all new brakes lines .repacked the front bearings with new seals and put the d350 hubs on. found out the d70 has 4.56 gears...aaand i built a little flatbed
made some mounts to the frame in the center to reuse the gooseneck hitch that came in the truck
should look gooood
just gotta make the headache rack and plate the back for some LED's...
put new brakes on the front and rear. ran all new brakes lines .repacked the front bearings with new seals and put the d350 hubs on. found out the d70 has 4.56 gears...aaand i built a little flatbed
made some mounts to the frame in the center to reuse the gooseneck hitch that came in the truck
should look gooood
just gotta make the headache rack and plate the back for some LED's...
Sweet looking truck though, love the flatbed. You're doing a heck of a job dude, great write up/thread! 
.
02-28-2011, 02:51 PM
#14
Registered User
Dude that will be sweet when you get it done! I don't remember ever seeing an extended cab dually,not sayin they did not make them I just can't remember seeing one. Any way it will be sweet!!
02-28-2011, 03:57 PM
#15
Registered User
Join Date: Oct 2009
Location: Claymont, Del and Horsham, PA
Posts: 1,830
Likes: 0
Received 1 Like
on
1 Post
Looks really good, wait until you get some paint on that thing, it changes the attitude like night and day, and you'll get your motivation back. i always think "man this thing is ugly" when i'm doing body work.