70mph, 1850rpms, 285's....
#1
Chapter President
Thread Starter
Join Date: Oct 2004
Location: Highlands Ranch, Colorado
Posts: 978
Likes: 0
Received 0 Likes
on
0 Posts
70mph, 1850rpms, 285's....
So what gears do I have?
I've looked everywhere I can think to check, and no luck.
I'm betting on 3.55s, not 4.10's, but thought I'd ask the experts?
Oh, and the 70mph was per gps, not uncorrected speedo....
I've looked everywhere I can think to check, and no luck.
I'm betting on 3.55s, not 4.10's, but thought I'd ask the experts?
Oh, and the 70mph was per gps, not uncorrected speedo....
#5
Registered User
Join Date: Dec 2005
Location: Henry Co., KY
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
3.55's. The only two factory options that Dodge came out with before 2003 were 3.55's and 4.10's. I have 4.10's with 285's and I'm around 2200 RPM at 70 MPH.
#7
Registered User
Join Date: Mar 2004
Location: Wichita, Kansas
Posts: 1,385
Likes: 0
Received 0 Likes
on
0 Posts
with 3.55's, 285's(33's) and a 47RE at 1850RPM, the speed calculates to 74mph... 70mph calculates to 1750RPM...
with 4.10's and 285's, the RPM for 70mph calculates to 2025RPM...
with 4.10's and 285's, the RPM for 70mph calculates to 2025RPM...
Trending Topics
#10
Registered User
Also, not to steal the thread, but manual vs. auto, autos overdrive is a bit taller than the NV4500. .74 vs .76 I think, I used to turn 1850 at 65 (on stock 245/75-16) with the auto, now I'm at about 2k at 65 with the 5 spd, 3.55's.
#11
#12
Registered User
Join Date: Mar 2004
Location: Wichita, Kansas
Posts: 1,385
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
EPCO
3rd Generation Ram - Non Drivetrain - All Years
1
06-09-2009 02:22 PM
taken5875
Performance and Accessories 2nd gen only
2
11-17-2008 10:48 PM
dodgecowboy04.5
3rd Gen High Performance and Accessories (5.9L Only)
15
09-06-2008 12:03 AM
lawnman757
3rd Gen High Performance and Accessories (5.9L Only)
8
01-10-2008 12:45 PM