2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

6x9 wiring diagram

Old 04-18-2006, 08:13 PM
  #1  
Registered User
Thread Starter
 
trex's Avatar
 
Join Date: Jun 2005
Location: charleston, sc
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
6x9 wiring diagram

anyone know what all 10 wires are for on the factory speaker connector for a amplified system?
Old 04-18-2006, 08:46 PM
  #2  
Registered User
 
mojave_ron's Avatar
 
Join Date: Jun 2005
Location: Phelan Ca.
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
http://www.installdr.com/Harnesses/DCP-Wiring.pdf
Old 04-18-2006, 09:09 PM
  #3  
Registered User
 
dhvaughan's Avatar
 
Join Date: Apr 2006
Location: Gainesville, GA.
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
nice post above ron...
I just replaced my factory am/fm/cassette in my '01 with a cd/mp3 player from Best Buy. I bought the nice little holder/trim kit ($18) and the wiring connector ($18). I recommend both these items. The trim kit has these little metal wedges that hold the unit tight, and has screw holes for the factory locations. Looks really nice if i do say so myself. This was not your question, but these are the aftermarket wires, says... all colors may not be present....
Red 12v ignition/acc.
Yellow 12v battery/memory for presets.
Black ground
Blue power antenna
Blue/white amp turn on.
Black/white amp ground.
Orange illumination
Orange/white dimmer
Gray right front +
Gray/black right front -
White left front +
White/black left front -
Violet right rear +
Violet/black right rear -
Green left rear +
Green/black left rear -
Old 04-20-2006, 07:09 PM
  #4  
Registered User
Thread Starter
 
trex's Avatar
 
Join Date: Jun 2005
Location: charleston, sc
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
im sorry i didnt make myself clear. i need to know what the wires in the door that connect to the factory 6x9 speaker go to.
Old 04-20-2006, 09:03 PM
  #5  
Registered User
 
Itsmejoe231's Avatar
 
Join Date: Oct 2005
Location: Highlands, Tx
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by trex
im sorry i didnt make myself clear. i need to know what the wires in the door that connect to the factory 6x9 speaker go to.
I can email you some scanned prints of the speaker wiring. PM me you email address.
Old 04-20-2006, 09:35 PM
  #6  
Registered User
 
Sixpack's Avatar
 
Join Date: Dec 2002
Posts: 208
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by trex
im sorry i didnt make myself clear. i need to know what the wires in the door that connect to the factory 6x9 speaker go to.

If you are replacing the head unit and speakers (Infinity) with after market equiptment here is how I wired mine up:

Driver front : splice yellow/red and dark green and new speaker +
splice Yellow/blk to brn/red and new speaker -

Driver rear: splice brn/yellow and wh/violet together then spice
brn/light blue and wh/dk grn together

Passenger front: splice lb/red and violet and new speaker +
splice db/red and lb/blk and new speaker -

Passenger rear: splice db/wh and tan/violet
splice db/or and tan/blk

Just unplug the old rears and reconnect the new rear speakers with the wires you just took off the old speaker

Also tape or insulate the black with red tracer and black with violet wires in both doors. These are the power/ground wires for the amps.

Good luck. Phil
Old 04-22-2006, 09:25 PM
  #7  
Registered User
Thread Starter
 
trex's Avatar
 
Join Date: Jun 2005
Location: charleston, sc
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
weird truck

maybe i just have a mutant truck but none of the diagrams have made any sense. in my drivers side door i had a 6x9 speaker with a small amp attached to it. i removed it to put in pioneer's and the connector for the speaker has the following wires. red, black, orange, yellow, white, green, blue, gray, brown, violet. comon sense tells me that two wires are for the amp power. Four wires coming in the amp and four going out. so what goes where?
Old 04-22-2006, 09:35 PM
  #8  
Registered User
 
Alphacowboy's Avatar
 
Join Date: Nov 2004
Location: Lakeville, MN
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
four wires out.... well the amp is also a cross over for the tweeter in the a-pillar. so there is two of your 4, the other two go to the rear speaker on the same side, as the amp drives both front and rear speakers.
Old 04-23-2006, 09:33 AM
  #9  
Registered User
 
smoke_pedal's Avatar
 
Join Date: Jan 2006
Location: I've been everywhere man
Posts: 157
Likes: 0
Received 1 Like on 1 Post
When I first saw the title to this thread, I thought well, whatever wire is connected to + you connect to +, whatever is connected to -, you connect to -. I remember wiring my stereo now though. it was a pain.
Old 04-23-2006, 06:07 PM
  #10  
Registered User
Thread Starter
 
trex's Avatar
 
Join Date: Jun 2005
Location: charleston, sc
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
i finally got it straight for now. my pass. door factory amp i left in and just tucked it in the door. the drivers door i had to just try wires to get it right. urgh dodge doesnt make it easy!
Old 04-23-2006, 11:37 PM
  #11  
Registered User
 
4doogie's Avatar
 
Join Date: Dec 2003
Location: north cali
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
OK so can someone like make a diagram or something thats like for the guid to stupid people. Im to lazy to be testing them all last time I tried when i was fixing a miror i ended up just getting mad at myself. i have a really really nice deck from alpine. great deck but only the tweeters are on. so is there a way to turn the stock 6x9's on, or bypass the amp? and what if i just want to put in simple new 6x9 speakers and run them off the deck power, what wires do i plug to the new speaker + -? thanks guys. dodge sure made it hard, what happened to just a black wire and a red one?
Old 04-23-2006, 11:51 PM
  #12  
Registered User
 
Itsmejoe231's Avatar
 
Join Date: Oct 2005
Location: Highlands, Tx
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
The wire in the doors are the same wire of the same color at the head unit . Pick you 2 wires at the head unit and use the same color at the speaker in the door. That would be the easy way without running new wire. But this dont address the rear speakers or the tweeters on the A-pillar.
Old 04-24-2006, 12:13 PM
  #13  
Registered User
 
4doogie's Avatar
 
Join Date: Dec 2003
Location: north cali
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
hahaha, that means i need to take my deck out.... lol darn.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
serious
1st Gen. Ram - All Topics
11
08-31-2010 10:41 AM
falstaff
3rd Gen High Performance and Accessories (5.9L Only)
34
09-16-2009 09:44 PM
localnet
3rd Gen High Performance and Accessories (5.9L Only)
4
08-14-2004 11:59 AM
Stevenc
Towing and Hauling / RV
15
11-21-2003 09:05 AM
Mostwanted
Other
3
11-10-2003 11:38 AM


Thread Tools
Search this Thread
Quick Reply: 6x9 wiring diagram



All times are GMT -5. The time now is 06:42 AM.