500 hp and stock lines
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
500 hp and stock lines
Im looking to run about 500 hp or so, with a TST MP-8 stack and water meth. With all supporting mods. The question that I have is with the jacobs brake that I have the vacume pump is in the way of a big line kit. So if i drill the banjo bolts and use the stock lines from the fuel filter will there be enough fuel without using the big line kit. Thanks Joel
#3
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
Its not the break its the vacume pump that sits right buy the CP3. It sits so close that the big line kit wont fit. I called glacier diesel and they said that you just need to install a high flow banjo. There is a pic in my profile.
#4
DTR Advertiser
Join Date: Sep 2002
Location: Va Beach,Va
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
My lines from the filter to the cp3 are stock. I have a customer with a 06 and his fuel system is stock front to back and he is running 540hp and 12.60s. You will be fine at 500hp. Tim
#6
Banned
Join Date: Oct 2006
Location: Corpus Christi, TX
Posts: 1,136
Likes: 0
Received 0 Likes
on
0 Posts
The stock lines will do the job, a pusher pump will feed the CP3, after that worry about draining the rail. If you move to a geared up CP3 or staged CP3 you can worry about different size hose, untill then forget about it.
Trending Topics
#8
Registered User
Join Date: Dec 2003
Location: weston,wv
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
yannick
Performance and Accessories 2nd gen only
6
04-26-2004 03:38 PM
Hummin Cummins
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-11-2003 12:14 PM