4x4 posi lock?
#2
Registered User
Join Date: Sep 2008
Location: COOS BAY OREGON
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Its not too bad. Just routing the cable down to the axle is tricky cause you gotta make sure it doesn't rub anything or get in the way of the suspension. I used some big Zip ties to hold it to the back side of the axle. You'll be glad you got it. I use it all the time moving my big enclosed trailer in 4 Low cause the Dual Disk is so grabby trying to idle trailers around. Chris
#3
thanks for the input? someone told me once that you have to adjust the cable or something? anybody have any input on this? how hard is it to turn the **** when its hooked up properly?
#4
Registered User
Join Date: Sep 2008
Location: COOS BAY OREGON
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Its not too bad to adjust. You just want make sure the transfer case is in 4wd when pulling the cable. It helps line up the collar when connecting the axles internally. Once its pulled I normally just give it a twist out to make sure its good and tight.
Thread
Thread Starter
Forum
Replies
Last Post
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
8
07-10-2007 11:46 AM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
1
07-07-2007 12:46 PM
TxDiesel007
12 Valve Engine and Drivetrain
4
07-29-2005 02:47 PM