3M removal
#2
Registered User
Re:3M removal
I have had some success using strong fishline to "saw" back and forth around things put on with 3m. The residue left can be removed with various cleaners, but a little rubbing with WD40 or the like works pretty good. Post some pics of the finished job. I'm thinking about doing the same thing if the CFO cuts loose with the coin.
Ed
Ed
#3
Guest
Posts: n/a
Re:3M removal
I used filament from parachute cord to saw off the emblem through the foam, then used some "Bug and Tar Remover" I had laying around. It took a lot of elbow grease though. My old lady's generic (acetone) finger nail polish was not very helpful at all. I was very weak stuff though.
The installation was a snap. The fit and finish are outstanding. Prior to installation, my BFG 315X75 R17's on American Racing Python rims stuck out past the fender a solid 2". The fit is now perfect with the flares (Bushwhacker Extend a Fender) extending past the tires about 3/4".
I haven't intalled a leveling kit yet. I haven't had any problems with rubbing but wanted to lift a small amount for cosmetic reasons. I'm afraid the right front passenger area is now going to rub with any compression at all, even street driving, during a right turn. It may be time for the winch/bumper and D25 coils sooner than anticipated.
I took a couple of digital images but don't know how to post them here. I used to link them to Yahoo's GeoCity but the last time I tried that they would not allow the images to be used that way. They instituted some sort of block. Is there another site to use for "storage" of the images?
The installation was a snap. The fit and finish are outstanding. Prior to installation, my BFG 315X75 R17's on American Racing Python rims stuck out past the fender a solid 2". The fit is now perfect with the flares (Bushwhacker Extend a Fender) extending past the tires about 3/4".
I haven't intalled a leveling kit yet. I haven't had any problems with rubbing but wanted to lift a small amount for cosmetic reasons. I'm afraid the right front passenger area is now going to rub with any compression at all, even street driving, during a right turn. It may be time for the winch/bumper and D25 coils sooner than anticipated.
I took a couple of digital images but don't know how to post them here. I used to link them to Yahoo's GeoCity but the last time I tried that they would not allow the images to be used that way. They instituted some sort of block. Is there another site to use for "storage" of the images?
#4
Administrator
Re:3M removal
[quote author=commando link=board=17;threadid=17886;start=0#msg167400 date=1059853386]
I took a couple of digital images but don't know how to post them here. I used to link them to Yahoo's GeoCity but the last time I tried that they would allow the images to be used that way. They instituted some sort of block. Is there another site to use for "storage" of the images?
[/quote]
You can create an album of pics here, then link to them there.
"Members Photo's" above on the main graphic.
(only problem, you can't delete them once they are there, you have to ask an Admin to delete them for you, but they are more than happy to oblige)
phox
I took a couple of digital images but don't know how to post them here. I used to link them to Yahoo's GeoCity but the last time I tried that they would allow the images to be used that way. They instituted some sort of block. Is there another site to use for "storage" of the images?
[/quote]
You can create an album of pics here, then link to them there.
"Members Photo's" above on the main graphic.
(only problem, you can't delete them once they are there, you have to ask an Admin to delete them for you, but they are more than happy to oblige)
phox
#5
Guest
Posts: n/a
Re:3M removal
[quote author=phox_mulder link=board=17;threadid=17886;start=#msg167468 date=1059867109]
[quote author=commando link=board=17;threadid=17886;start=0#msg167400 date=1059853386]
I took a couple of digital images but don't know how to post them here. I used to link them to Yahoo's GeoCity but the last time I tried that they would allow the images to be used that way. They instituted some sort of block. Is there another site to use for "storage" of the images?
[/quote]
You can create an album of pics here, then link to them there.
"Members Photo's" above on the main graphic.
(only problem, you can't delete them once they are there, you have to ask an Admin to delete them for you, but they are more than happy to oblige)
phox
[/quote]
OR - you can use the pointer down in my sig, at the top, to a photo hosting website like I use - "Webshots"... It's a FREE site, allows descriptive text along with the photos, you get LOTS of free space for LOTS of albums - and can change or delete them as you choose - and all you need do, is provide the SAME sort of pointer in your post text HERE, to display those Webshot photos - like THIS:
;D ;D ;D
[quote author=commando link=board=17;threadid=17886;start=0#msg167400 date=1059853386]
I took a couple of digital images but don't know how to post them here. I used to link them to Yahoo's GeoCity but the last time I tried that they would allow the images to be used that way. They instituted some sort of block. Is there another site to use for "storage" of the images?
[/quote]
You can create an album of pics here, then link to them there.
"Members Photo's" above on the main graphic.
(only problem, you can't delete them once they are there, you have to ask an Admin to delete them for you, but they are more than happy to oblige)
phox
[/quote]
OR - you can use the pointer down in my sig, at the top, to a photo hosting website like I use - "Webshots"... It's a FREE site, allows descriptive text along with the photos, you get LOTS of free space for LOTS of albums - and can change or delete them as you choose - and all you need do, is provide the SAME sort of pointer in your post text HERE, to display those Webshot photos - like THIS:
;D ;D ;D
#6
Administrator
Re:3M removal
A few users have noticed that webshots isn't viewable from corporate locations (me being one of them, work LAN has it blocked for some reason), and apparantly not from here either, as there is a nice red x at the bottom of Garys post.
phox
phox
#7
Guest
Posts: n/a
Re:3M removal
I got it worked out. Check in my album titled "Commando." It's #38.
https://www.dieseltruckresource.com/....php?album=285
https://www.dieseltruckresource.com/....php?album=285
Trending Topics
#8
Registered User
Join Date: Jun 2002
Location: Midland, Ontario.
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re:3M removal
commando
Soften things up with the hot air gun, then gently pull it away from the body while still applying hot air. Took about 1 min. per side to get them off. Pete
Soften things up with the hot air gun, then gently pull it away from the body while still applying hot air. Took about 1 min. per side to get them off. Pete
#9
Guest
Posts: n/a
Re:3M removal
[quote author=phox_mulder link=board=17;threadid=17886;start=#msg167486 date=1059868837]
A few users have said, noticed that webshots isn't viewable from corporate locations (me being one of them, work LAN has it blocked for some reason), and apparantly not from here either, as there is a nice red x at the bottom of Garys post.
phox
[/quote]
That's not a Webshots problem, it's a security-related one used by some businesses to discourage unauthorized "websurfing" on company time - I'd bet your system administrator - if you're authorized - could upgrade your system access level to open photos on Webshots...
A few users have said, noticed that webshots isn't viewable from corporate locations (me being one of them, work LAN has it blocked for some reason), and apparantly not from here either, as there is a nice red x at the bottom of Garys post.
phox
[/quote]
That's not a Webshots problem, it's a security-related one used by some businesses to discourage unauthorized "websurfing" on company time - I'd bet your system administrator - if you're authorized - could upgrade your system access level to open photos on Webshots...
#10
Administrator
Re:3M removal
I'm at home now, and there's still a red x there.
Tried going directly to the pic and it said I wasn't authorized.
I don't know why corporate picked on Webshots, there are few places we can't go, any music downloading and Yahoo Games are some.
Back to topic ;D
Commando, are you planning on relocating the Cummins' badges?
I think I have the same flares, my tire and wheel combo stuck out almost 3 inches, and now most of it is covered, 1/2 to 1" still sticks out, but looks just right IMHO.
phox
Tried going directly to the pic and it said I wasn't authorized.
I don't know why corporate picked on Webshots, there are few places we can't go, any music downloading and Yahoo Games are some.
Back to topic ;D
Commando, are you planning on relocating the Cummins' badges?
I think I have the same flares, my tire and wheel combo stuck out almost 3 inches, and now most of it is covered, 1/2 to 1" still sticks out, but looks just right IMHO.
phox
#11
Registered User
Join Date: Aug 2003
Location: Maryland
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
It's webshots
It seems these days most companies that allow you to host picturers on their server no longer allow you to link them to show from other websites. If you can't find a server that llows linking of images, check with your ISP to see if you get server space with them.
- Crabjoe
- Crabjoe
#12
Registered User
Join Date: Jun 2002
Location: Kansas City & Maysville, MO
Posts: 811
Likes: 0
Received 1 Like
on
1 Post
Re:3M removal
[quote author=Gary - KJ6Q link=board=17;threadid=17886;start=0#msg167491 date=1059869580]
That's not a Webshots problem, it's a security-related one used by some businesses to discourage unauthorized "websurfing" on company time - I'd bet your system administrator - if you're authorized - could upgrade your system access level to open photos on Webshots...
[/quote]
It's blocked where I work for a couple of reasons: One is to avoid having spy-ware installed on the PCs. Another is to prevent people from running those random photo screen-savers and sucking up bandwidth and potentially displaying something offensive.
That's not a Webshots problem, it's a security-related one used by some businesses to discourage unauthorized "websurfing" on company time - I'd bet your system administrator - if you're authorized - could upgrade your system access level to open photos on Webshots...
[/quote]
It's blocked where I work for a couple of reasons: One is to avoid having spy-ware installed on the PCs. Another is to prevent people from running those random photo screen-savers and sucking up bandwidth and potentially displaying something offensive.
#13
Administrator / Scooter Bum
Re:3M removal
Hey Gary, I see a red X in the box and I'm at home on my DSL. ???
Edit:
I "cut & pasted" the "properties" address, it opened the webshots photo, now I can see the picture in your post instead of the box with an X. ???
Re-Edit:
I exited the forums, went back to this post, now I see the box with an X again........I'm soooo confused........
Edit:
I "cut & pasted" the "properties" address, it opened the webshots photo, now I can see the picture in your post instead of the box with an X. ???
Re-Edit:
I exited the forums, went back to this post, now I see the box with an X again........I'm soooo confused........
#14
Guest
Posts: n/a
Re:3M removal
[quote author=Shovelhead link=board=17;threadid=17886;start=#msg167599 date=1059915789]
Hey Gary, I see a red X in the box and I'm at home on my DSL. ???
Edit:
I "cut & pasted" the "properties" address, it opened the webshots photo, now I can see the picture in your post instead of the box with an X. ???
Re-Edit:
I exited the forums, went back to this post, now I see the box with an X again........I'm soooo confused........
[/quote]
I dunno what to tell ya - the pointer to the thumbnail over at the left in my username comes from the same source - can you see that one OK?
Hope others aren't having the same problem...
Hey Gary, I see a red X in the box and I'm at home on my DSL. ???
Edit:
I "cut & pasted" the "properties" address, it opened the webshots photo, now I can see the picture in your post instead of the box with an X. ???
Re-Edit:
I exited the forums, went back to this post, now I see the box with an X again........I'm soooo confused........
[/quote]
I dunno what to tell ya - the pointer to the thumbnail over at the left in my username comes from the same source - can you see that one OK?
Hope others aren't having the same problem...