3K GSK install
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Royse City, TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
3K GSK install
It has been suggested that I install a 3K governor kit to allow the engine to exceed the 2700RPM defuelling cutoff.
How hard is it to install this kit? Special tools?
Thanks
David
How hard is it to install this kit? Special tools?
Thanks
David
#2
Registered User
Join Date: Dec 2002
Location: Bethpage, Tn
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Re:3K GSK install
It's relatively easy to install. I would suggest using the side plug on the pump. What becomes a pain then is removing the fuel shut off solenoid, but with patience(sp) it will come.
You can remove the retainer nut on the springs with a screw driver, but I highly recommend grinding a notch in something like a screwdriver or small prybar(what I used) to fit the notches in the retainer nut and clear the stud for the gov. springs.
You will love this BOMB it was my first. Really helped me towing gooseneck's with 33" tires and 3.55 gears.
You can remove the retainer nut on the springs with a screw driver, but I highly recommend grinding a notch in something like a screwdriver or small prybar(what I used) to fit the notches in the retainer nut and clear the stud for the gov. springs.
You will love this BOMB it was my first. Really helped me towing gooseneck's with 33" tires and 3.55 gears.
Thread
Thread Starter
Forum
Replies
Last Post
SHARPMACHINE
Performance and Accessories 2nd gen only
7
03-06-2007 08:45 AM
MR HYDROSEED
Performance and Accessories 2nd gen only
6
03-09-2005 10:49 PM
Got Smoke?
Performance and Accessories 2nd gen only
7
10-26-2004 03:57 PM