38.5" tires. Do I need a larger lift?
#1
Registered User
Thread Starter
Join Date: Jul 2002
Location: Bucks county PA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
38.5" tires. Do I need a larger lift?
I have the skyjacker 4.5" lift thats more or less 6" of lift. I have run 38.8x11x16's on the stock wheels and they fit just fine no rubbing. I want to run procomp xtreme AT 38.5x14.5x17 on H2 wheels. The actual width i think is 15.1 according to procomps website but dosent say on what wheel. Does anyone think this will fit? And if not will a 7" skyjacker type lift work? I'm thinking DC long arms, more rear blocks (im cheap and allready paid for the full skyjacker leaf packs once) and coils from some where. I can thandel the red ones for SJ and not paying to have there powder coat burned off and re done in black again.
Thanks all.
Thanks all.
#4
Registered User
Thread Starter
Join Date: Jul 2002
Location: Bucks county PA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered User
Join Date: Mar 2007
Location: Temecula, CA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
That is what it sounds like, but I also have fender flares that is where the tires would rub on mine. If you don't have flares, try to find someone in your area with that size tires to see if they fit. Good Luck!
#6
Registered User
Thread Starter
Join Date: Jul 2002
Location: Bucks county PA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
Thats what I was hopeing to do but I doubt ill find anyone with a tire that size on the correct backspace wheel. Aftermarket wheels seem to stick out much farther then stock or H2 wheels.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
VikingDiesel
3rd Gen High Performance and Accessories (5.9L Only)
47
05-11-2007 12:52 AM
sakisaki400
3rd Generation Ram - Non Drivetrain - All Years
23
12-31-2006 10:17 PM
Scotty
Towing and Hauling / RV
15
04-01-2005 10:09 PM
needlern32724
3rd Gen High Performance and Accessories (5.9L Only)
8
05-01-2004 01:46 PM