1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

360 swap

Thread Tools
 
Search this Thread
 
Old 01-16-2010, 01:19 PM
  #1  
DTR'S RESIDENT NIGHT MECHANIC AND WELDER
Thread Starter
 
reblerider20's Avatar
 
Join Date: Feb 2009
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
360 swap

what wires go where with the speedo plug. changing plug from auto to 360. the vss plug need a wiring diagram
Old 01-16-2010, 09:00 PM
  #2  
DTR'S RESIDENT NIGHT MECHANIC AND WELDER
Thread Starter
 
reblerider20's Avatar
 
Join Date: Feb 2009
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
bump the auto plug has three wires and the manual has two. need to know which ones to use
Old 01-16-2010, 09:12 PM
  #3  
Registered User
 
Falcon1's Avatar
 
Join Date: Dec 2005
Location: Graham, Washington
Posts: 632
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by reblerider20
bump the auto plug has three wires and the manual has two. need to know which ones to use
Good luck I'm going through the same thing............
Old 01-16-2010, 09:17 PM
  #4  
Registered User
 
cmac's Avatar
 
Join Date: Aug 2006
Location: Duluth, MN
Posts: 643
Likes: 0
Received 0 Likes on 0 Posts
probably not going to be any help but on my truck the auto tranny has 3 wires going to it. the middle pin is the neutral saftey switch. the outside 2 are for the reverse lights.
Old 01-16-2010, 09:24 PM
  #5  
DTR'S RESIDENT NIGHT MECHANIC AND WELDER
Thread Starter
 
reblerider20's Avatar
 
Join Date: Feb 2009
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
this is for the speedo plug sorry if un clear
Old 01-17-2010, 02:52 PM
  #6  
Adminstrator-ess
 
wannadiesel's Avatar
 
Join Date: Mar 2003
Location: New Holland, PA
Posts: 22,594
Likes: 0
Received 16 Likes on 16 Posts
Use the automatic VSS.
Old 01-17-2010, 05:41 PM
  #7  
DTR'S RESIDENT NIGHT MECHANIC AND WELDER
Thread Starter
 
reblerider20's Avatar
 
Join Date: Feb 2009
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
what do you mean wanna
Old 01-17-2010, 05:47 PM
  #8  
Adminstrator-ess
 
wannadiesel's Avatar
 
Join Date: Mar 2003
Location: New Holland, PA
Posts: 22,594
Likes: 0
Received 16 Likes on 16 Posts
Screw the VSS from the auto trans onto the ratio adapter on the Getrag and plug it back in.
Old 01-17-2010, 08:10 PM
  #9  
DTR'S RESIDENT NIGHT MECHANIC AND WELDER
Thread Starter
 
reblerider20's Avatar
 
Join Date: Feb 2009
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
thanks wanna
Old 01-17-2010, 10:42 PM
  #10  
Registered User
 
cbtumedic's Avatar
 
Join Date: Jul 2007
Location: Arlington, Tx
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Just make sure to tighten it up, ask rbrettctd about that one lol.
Old 01-18-2010, 12:43 PM
  #11  
Registered User
 
rbrettctd's Avatar
 
Join Date: Aug 2006
Location: Cresson/Stephenville Texas
Posts: 2,436
Likes: 0
Received 0 Likes on 0 Posts
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
banks twinram
24 Valve Engine and Drivetrain
5
02-04-2010 06:46 PM
rbrettctd
1st Gen. Ram - All Topics
22
04-11-2007 07:07 PM
Just4Smoke
12 Valve Engine and Drivetrain
6
06-08-2006 11:26 AM
jabber
12 Valve Engine and Drivetrain
3
03-22-2006 03:10 PM
oldtrucks
General Diesel Discussion
9
01-24-2003 11:36 AM



Quick Reply: 360 swap



All times are GMT -5. The time now is 12:18 AM.