300 HP injectors in a stock 24 valve?
04-28-2004, 02:12 PM
#1
Registered User
Thread Starter
300 HP injectors in a stock 24 valve?
Can I put 300 HP injectors in a stock 24 Valve without throwing any codes? I am not concerned about the tranny.
04-28-2004, 03:19 PM
#3
Registered User
No code that I can think of, but will throw lots of smoke....at the very least - a boost fooler!
Curiosity overwhelms .... Why would you want to do that?
Curiosity overwhelms .... Why would you want to do that?
04-28-2004, 07:26 PM
#5
Registered User
Join Date: Jul 2002
Location: Raleigh, NC
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
Where are you getting the 300 injectors from, Phil? Bosch made 300s and 370s for the 12 valve motor, but only 275hp injectors for the 24V motors (for the RV motors). It sounds like someone may be selling some snake oil....
John
John
04-28-2004, 09:01 PM
#7
Registered User
Join Date: Jul 2002
Location: Raleigh, NC
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
Torquemech,
The guys on the TDR talked about those awhile back. They found that the P/Ns for the injectors were the same, but Cummins did make a 300hp ISB. Here's a link to the thread:
http://www.turbodieselregister.com/f...=300+injectors
John
The guys on the TDR talked about those awhile back. They found that the P/Ns for the injectors were the same, but Cummins did make a 300hp ISB. Here's a link to the thread:
http://www.turbodieselregister.com/f...=300+injectors
John
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
thewished
Performance and Accessories 2nd gen only
3
03-21-2010 04:07 PM
capt.Ron
Performance and Accessories 2nd gen only
7
04-23-2006 01:57 PM