2nd gen tail pipe on a 1st gen?
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Elgin, Texas
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
2nd gen tail pipe on a 1st gen?
I buddy of mine has a 4" exhaust for a 2nd gen that I can get really cheap. If I bought a 4" downpipe from stan's or rip, could I make the 2nd gen 4" kit work the rest of the way? How much fabbing would it take?
#2
Registered User
Join Date: Sep 2004
Location: INWOOD, West 'BY GOD' Virginia
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
I have from about 1 foot in front of the muffler to the tailpipe from a second gen on mine. It is a 4" with a 5" tip
It does fit, BUT it is REAL close to the rear shock, I mean, REAL close , when I have a decent amout of weight in the bed it hits the shock a little. I used a little wire to hold it closer to the frame for more clearence.
Good luck,
Michael
It does fit, BUT it is REAL close to the rear shock, I mean, REAL close , when I have a decent amout of weight in the bed it hits the shock a little. I used a little wire to hold it closer to the frame for more clearence.
Good luck,
Michael
Thread
Thread Starter
Forum
Replies
Last Post
BRUISER
1st Gen. Ram - All Topics
11
02-02-2015 11:25 AM
JonnyThrottle
Performance and Accessories 2nd gen only
2
12-07-2007 04:51 PM