3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

2004 - 2500 Break In

Old 09-18-2003, 11:10 AM
  #1  
Registered User
Thread Starter
 
kayjh's Avatar
 
Join Date: Jan 2003
Location: Canada
Posts: 202
Likes: 0
Received 0 Likes on 0 Posts
2004 - 2500 Break In

I'm sure this must have been discussed before, but a search of the archives didn't turn up what I am looking for.

Does anyone know what the manual says about towing with a new truck? I know the Cummins engine is ready to go from the start, but what about the other components (rear diff, transmission, transfer case).

I have to make a short trip (10 miles each way) on a flat highway (except the rail overpasses) this weekend and don't think I'll have had time to do any driving before then (OK, maybe 60 - 70 miles). Should I just use the old tow vehicle this weekend or does tha manual say towing is OK?

My trailer is a 2-Horse and weighs 3,000# + horse (1,250#) for a total weight of about 4,500# with all my "stuff".

It's not like I don't have a tow vehicle for the weekend, but wouldn't mind taking the truck if it doesn't impair a proper break in of the drivetrain.
Old 09-18-2003, 11:13 AM
  #2  
Banned
 
XcumminsX's Avatar
 
Join Date: Sep 2003
Location: ILLLLINOIS
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Re:2004 - 2500 Break In

says not to tow for 1000 miles i believe, could be cuz of trans
Old 09-18-2003, 11:36 AM
  #3  
Registered User
 
DF5152's Avatar
 
Join Date: Dec 2002
Location: Long Island, NY
Posts: 741
Likes: 0
Received 0 Likes on 0 Posts
Re:2004 - 2500 Break In

I believe my manual for the 03's said not to tow for the 1st 500 miles they they recomend loading it up and going to town. It also said that if you plan to tow extensively to change the diff fluid to a 90-140 synthetic,,,at least i think i read that in there.
Old 09-18-2003, 11:46 AM
  #4  
Registered User
 
bulabula's Avatar
 
Join Date: Feb 2002
Location: Eastern & Western Merryland
Posts: 2,239
Likes: 0
Received 0 Likes on 0 Posts
Re:2004 - 2500 Break In

My manual says wait for 500 miles. I waited for about 400. Haven't changed any drive train fluid yet; other than adding a little bit in the rear diff.
Old 09-18-2003, 11:46 AM
  #5  
Registered User
Thread Starter
 
kayjh's Avatar
 
Join Date: Jan 2003
Location: Canada
Posts: 202
Likes: 0
Received 0 Likes on 0 Posts
Re:2004 - 2500 Break In

[quote author=DF5152 link=board=20;threadid=19811;start=0#msg186367 date=1063903013]
I believe my manual for the 03's said not to tow for the 1st 500 miles they they recomend loading it up and going to town. It also said that if you plan to tow extensively to change the diff fluid to a 90-140 synthetic,,,at least i think i read that in there.
[/quote]

Thanks DF,

I thought someone else had said 500 miles as well. I'll have a chance to check the manual out when I pick my truck up later today or tomorrow, but was curious. I use a company van to tow my trailer, but it requires the route guy to unload and reload another van to allow me to use his - a bit of a pain. One more weekend won't kill me (or him) though.
Old 09-18-2003, 02:51 PM
  #6  
Registered User
 
doug's Avatar
 
Join Date: Jul 2002
Location: Boise ID
Posts: 1,340
Likes: 0
Received 0 Likes on 0 Posts
Re:2004 - 2500 Break In

the new AA axles come with synthetic already in the diff.
Old 09-20-2003, 08:47 PM
  #7  
Registered User
 
gadgets's Avatar
 
Join Date: Feb 2003
Location: Long Island, NY
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
Re:2004 - 2500 Break In

The manual for my 2003 says:

No load or towing at all for the first 500 miles;

Then, next 500 miles, towing or load ok, but not over 50mph.

This was supposed to be for the rear axle to break in, not the CTD, but I think it makes good sense anyway...


Rene
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
New2Diesel
Other
15
02-28-2011 08:28 PM
J Lent
24 Valve Engine and Drivetrain
4
10-07-2009 06:50 PM
Chip
3rd Gen Engine and Drivetrain -> 2003-2007
14
06-21-2009 03:59 AM
Huntindad
3rd Generation Ram - Non Drivetrain - All Years
6
02-09-2004 06:45 AM


Thread Tools
Search this Thread
Quick Reply: 2004 - 2500 Break In



All times are GMT -5. The time now is 10:34 AM.