2 Din touch screen project
10-18-2009, 05:58 PM
#1
Registered User
Thread Starter
Join Date: Aug 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
2 Din touch screen project (with pics!)
Just wanted to have a cd player for my ram and i found a great deal on this clarion touch screen. Now the 2 din mod...
the cd/dvd player
little more place for the bigger unit
unit installed with home made braces
Bezel cutted with the player trim welded
holes filled with new plastic each pieces welded
with some putty
I'll post updated picture when i'll done all sanding and paint
the cd/dvd player
little more place for the bigger unit
unit installed with home made braces
Bezel cutted with the player trim welded
holes filled with new plastic each pieces welded
with some putty
I'll post updated picture when i'll done all sanding and paint
10-18-2009, 08:51 PM
#3
Registered User
Join Date: Aug 2007
Location: Birdsboro, (near Reading) PA
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
alot of work i used to do alot of custom install some years back you should get some fiberglass mat and mix up some resin alot easier and alot stronger I have a single din kenwood which flips out to a 6.5 inch screen seemed like the way to go not all the hard moddingto the dash. good luck
Thread
Thread Starter
Forum
Replies
Last Post
12valvewagon91
4th Gen High Performance and Accessories 2010 and Up
5
02-11-2011 03:26 PM
flyinnuts
4th Gen Ram -Non Drivetrain- 2010 and Up
2
09-02-2010 09:42 AM
Guy L
3rd Gen High Performance and Accessories (5.9L Only)
1
12-22-2003 08:25 PM