PDA

View Full Version : 1st Thread!!!

Sea:\>Drive
11-09-2007, 12:54 PM
Wooohoooo 1st to post in our new forum! Guess this is the end of the never-ending thread? See should never speak absolutely....[laugh]
skynyrd
11-09-2007, 03:50 PM
ahhhh we can still have a never ending thread it will just be in our own sub forum
scottsjeeprolet
11-09-2007, 07:26 PM
Dang it! I always miss out on the new stuff. Glad to see ya working hard today Keith!
bootsdodgejn
11-09-2007, 09:35 PM
wow we are upgrading lol
Sea:\>Drive
11-10-2007, 08:47 AM
wow we are upgrading lol

Larry is BOMBing the forums!! [laugh]
lukedaemon
11-10-2007, 02:32 PM
Wow!! I like this sub thread biz!! Easy to find the locals.

Thanks whom ever you are for the efforts to make a better forum.

Peace
md-rebel
11-12-2007, 08:20 AM
Guys do I need any grill covers to keep temps up? or it's not that cold here??
Sea:\>Drive
11-12-2007, 10:31 AM
If you're a short tripper (less than 10 miles) you may. I drive >50 miles a day and have no trouble without winter fronts or card board.
md-rebel
11-12-2007, 10:40 AM
OK I do 43 each way to Beltsville so i should be ok.

Thanks
bootsdodgejn
11-13-2007, 08:57 AM
hey scott can i get the parts # for the stuff im missing for my trans temp. and the place u said id be able to get them
scottsjeeprolet
11-13-2007, 07:13 PM
hey scott can i get the parts # for the stuff im missing for my trans temp. and the place u said id be able to get them

Here is the fitting you need from www.mcmaster.com (http://www.mcmaster.com/)
5929K56
Steel Yor-Lok Tube Fitting Adapter for 1/2" Tube OD X 3/8" NPT Female Pipe
In stock at $8.65 Each
As for the trans temp sensor it self i don't have a clue [duhhh] You will need to find out what sensor will work with your gauge.
Administrator
11-13-2007, 08:56 PM
Wow!! I like this sub thread biz!! Easy to find the locals.

Thanks whom ever you are for the efforts to make a better forum.

Peace

No problem. Took me a while to get to it but I finally got it done.
bootsdodgejn
11-13-2007, 11:23 PM
Here is the fitting you need from www.mcmaster.com (http://www.mcmaster.com/)
5929K56
Steel Yor-Lok Tube Fitting Adapter for 1/2" Tube OD X 3/8" NPT Female Pipe
In stock at $8.65 Each
As for the trans temp sensor it self i don't have a clue [duhhh] You will need to find out what sensor will work with your gauge.

and were does that fitting go
scottsjeeprolet
11-14-2007, 08:49 AM
It goes in the hot line just below the heat exchanger. We'll just put the truck on the lift and cut the line. it's no big deal.
bootsdodgejn
11-14-2007, 08:52 AM
It goes in the hot line just below the heat exchanger. We'll just put the truck on the lift and cut the line. it's no big deal.

well if i get that and the sensor i need to put it in before WED if next week so when i go to bufflo i can keep watch on the temp