glocklove

Okay guys, I'm going to due my first Dyno Run tomorrow, need some help. I have the 48re in my truck. Need to know how it should be ran on the Dyno, the guy doing it, is not great with Diesels he has only done a couple. But he is the only guy in town with a Dyno Jet.

So, is there a certin RPM he should be at before he lets in go etc. any help please so I can get a good base line before I put my Smarty Jr in tomorrow.

TexasCTD

On a dynojet...........keep in overdrive and get up over 70mph so it won't shift down to 3rd. Then nail it. Good luck.

..

glocklove

Thanks man, at least I know what to watch for when this guy does the run..

DUKCALN

Don't forget to give us the results. Good luck

chrleb1

We i run them on my dynojet, i have to take them above 2 grand and then pin it. I'll start around 1,600 and then roll into the throttle and have it floored by 2,050.

Always in overdrive also.

Jason_K

what gear would you guys run w/ a 6 speed?

glocklove

Okay guys I made two pulls:

1st pull: 286 hp-522 trq

2nd pull: 284 hp- 531 trq

That is SAE corrected on the dynojet, due these #'s sound right with what I have listed in my sig??

Temp was: 95*
Hum was: 49%
according to the dyno screen.

I also got my smarty jr. today so maybe in couple weeks I'll try again with the smarty.

Stainless

Yup those numbers sound exaclty right, that smarty Jr will really help out alot.

SMOKIN-U

well last year with just a cai st8 pipe and the ez i put down 361 and 705 on a mustang dyno they all told me a stock 05 would put down around 270 and 525 so i would say your numbers are pretty close