12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

12v wont start

Thread Tools
 
Search this Thread
 
Old 11-28-2011, 01:33 PM
  #1  
Registered User
Thread Starter
 
brapppp's Avatar
 
Join Date: Nov 2007
Location: la luz
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Exclamation 12v wont start

i installed 4k governor springs sat afternoon... sat evening i was driving and got on it around 2500 it popped into neutral..[when i installed the tranny i didnt adjust the shift linkage right] it reved to around 3200 and the truck shut off... as i coasted i restarted the truck but it wouldnt rev would only run about 2000rpm about half throttle..... good oil pressure no abnormal engine noise. just spuddered a bit. parked it and the motor is dry no puddles [oil][water] under the truck. i went to start it sunday and it only cranks. checked governor springs there still at correct. pulled valve covers nothing bent. cracked injecters good fuel. will start on starting fluid.. just wont run. any suggestions?
Old 12-07-2011, 01:44 AM
  #2  
Registered User
Thread Starter
 
brapppp's Avatar
 
Join Date: Nov 2007
Location: la luz
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
40 degrees out of timing! To much rpm! Oh well were advanced now
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rynojr4644
12 Valve Engine and Drivetrain
14
05-18-2009 07:23 AM
D32C
HELP!
6
05-17-2009 08:57 PM
judgester
HELP!
10
11-25-2008 09:57 PM
qcstunter
HELP!
8
01-09-2007 04:10 PM
troutbum
HELP!
9
03-06-2006 03:40 PM



Quick Reply: 12v wont start



All times are GMT -5. The time now is 05:23 AM.