03' starting issues
02-21-2010, 09:33 AM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
03' starting issues
got a guy with a 03'..has edge and air dog..thats it. doesnt want to start. everything was fine until one day, it just wouldnt start. cracked injector lines and there wasnt much coming out while cranking. i had a cp3 pump laying around, stuck it on there and it wouldnt start but fuel is coming out of the cracked lines now. shot a little starting fluid and the truck fires up. ran fine for a little while, and again, its not wanting to start. if u start it with some fluid, it runs perfect, but when you shut it off, it wont start back up. any ideas? could it be a bad Relief valve on the rail?
02-21-2010, 08:28 PM
#2
Registered User
Join Date: Sep 2005
Location: Englewood, CO
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
got a guy with a 03'..has edge and air dog..thats it. doesnt want to start. everything was fine until one day, it just wouldnt start. cracked injector lines and there wasnt much coming out while cranking. i had a cp3 pump laying around, stuck it on there and it wouldnt start but fuel is coming out of the cracked lines now. shot a little starting fluid and the truck fires up. ran fine for a little while, and again, its not wanting to start. if u start it with some fluid, it runs perfect, but when you shut it off, it wont start back up. any ideas? could it be a bad Relief valve on the rail?
Thread
Thread Starter
Forum
Replies
Last Post
fourthandgoal
12 Valve Engine and Drivetrain
88
12-27-2011 05:39 AM
abc4yew
3rd Gen Engine and Drivetrain -> 2003-2007
3
03-15-2007 11:55 PM
FastSS
24 Valve Engine and Drivetrain
12
10-11-2004 02:57 PM