03 injector wires
11-18-2009, 09:51 PM
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: leakey tx
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
03 injector wires
has anybody had any problems with the injector wires? having problems with an 03 injectors not firing brand new injectors so we know they are good.
rough idle, missing, white smoke smell like diesel
thanks
rough idle, missing, white smoke smell like diesel
thanks
11-20-2009, 05:31 PM
#4
Registered User
Join Date: Dec 2002
Location: Concord, CA USA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
From the front of the block:
(1) green, orange
(2) brown, red
repeat for the rest of the cylinders
Pictures awaiting approval in my gallery if they don't appear in this post
Hope this helps
(1) green, orange
(2) brown, red
repeat for the rest of the cylinders
Pictures awaiting approval in my gallery if they don't appear in this post
Hope this helps
11-20-2009, 05:43 PM
#5
Registered User
If you had the computer controller wiring off for any reason, its possible you may have bent a pin putting the harness back on the pins. Picture is a Edge Harness. Shows what I'm talking about.
Dave
Dave
11-20-2009, 06:55 PM
#6
Chapter President
An 03 Does not have that connector there. The injector harness is quite a bit different.
Thread
Thread Starter
Forum
Replies
Last Post
Z-MAN
3rd Gen Engine and Drivetrain -> 2003-2007
36
01-08-2015 08:58 PM
onearizoldman
Towing and Hauling / RV
16
01-15-2004 11:19 AM
MR. GADGET
3rd Generation Ram - Non Drivetrain - All Years
6
09-04-2003 06:25 AM
Mark Thomas
3rd Gen Engine and Drivetrain -> 2003-2007
1
07-06-2003 06:38 PM