bmpmoss

I need to find the link to install my 366 spring.Need the one with pictures.
Thanks

Old-stuff

At the top of this section is a thread called stickies. Open that and scroll down to performance. then look for 3200 gov spring install. It will show you what you need.
Ray

__________________
95 3/4ton CTD, 5 speed,2wd, modified fuel plate,
3000 gsk, 343000 miles.
91 3/4ton CTD,5 speed,2wd,2turns smoke screw.Vandalized,all Glass and lights broken out.
future base for 47 Dodge PU body.
90 3/4ton CTD, 727,4x4, 4" exhaust, 2 turns full power screw, 3200 gsk.

Subliminal

I'd recommend reading the two or three guides and doing a search and reading as many threads on the matter as possible.

I did, and my install was easy, and I didn't have to take apart nor index my throttle.

sdseva

^^x2i didnt even think of leaving the throttle lever on, i wish i had done that when i did mine. other than having to re-index the throttle shaft everything else was rather easy. definitely read the runaway thread and anything pertaining to pump mods before getting into it. good luck and be patient...and be careful with the top hat

__________________
92' club cab le, long box, rag, 4x4, gauges fuel/boost/pyro, 3" straight pipe, star down, pin turned, power screw in a little, 366 spring, 1/8 bump, silencer ring MIA, BHAF, auto oil undercoat, a little loud, a little smokey

#1 Slayer fan

bmpmoss

I Did The Install And It Went Good.
However It Will Idle But It Dies When I Give It Fuel.the Slightest Touch On The Fuel Will Kill It.
What Did I Do Wrong????????????????